Dingtian input push: HTTP Digest auth + auto-config on assign
Secure the device→backend input push, and configure it automatically when the
admin assigns the device (no manual URL/secret entry).
Auth — HTTP Digest (chosen by hardware testing: the device can't push to a
self-signed HTTPS backend, but does Digest correctly; a URL token is sniffable/
logged):
- digest-auth.ts: MD5 qop=auth challenge/verify, single-use nonces (replay
resistance). Password never crosses the wire.
- push route: Digest + source-IP allowlist; per-device pushUser/pushPassword from
lane_devices. Still not behind the SPA cookie/CSRF auth (machine call). The
signed event log remains the real anti-fraud guarantee.
Auto-config on assign:
- setup assign: for push-capable devices, generate Digest creds, call
configureInputPush to write them + the push URLs to the device, store the creds
(password not echoed back). net.ts derives the backend IP on the device's
subnet (BACKEND_HOST_IP override).
- driver configureInputPush sets auth=2 + creds; PushConfig carries the creds.
- removed the earlier URL-token approach.
Two hard-won device-write bugs fixed in the driver:
- configApi now sets an explicit Content-Length — the device silently ignores
chunked request bodies (Node's default without Content-Length), so every config
write looked successful ({"status":0}) but did nothing. This was the root cause
of the session's "writes don't apply" mystery.
- #writeConfig polls until the change is verified, retrying (the device reboots on
apply; back-to-back writes were lost). The `pass` field caps at 31 chars, so the
generated password is 24 hex chars.
Verified on hardware: assign auto-configures the device; all 4 inputs then push
with Digest auth, zero failures. wiki/device-input-flow updated.
This commit is contained in:
@@ -42,12 +42,46 @@ the device or the network. Instead:
|
||||
allows), there is **no matching signed event → a detectable anomaly**. The anti-fraud guarantee
|
||||
is the **signed log**, not device/network auth.
|
||||
- The inbound push endpoint is intentionally **not behind the SPA's cookie/CSRF auth** (it's a
|
||||
machine call from the device). A **shared-secret / Basic-auth** on the push is available as
|
||||
defence-in-depth (the device supports it) — worth adding, but it is *not* the security boundary.
|
||||
machine call from the device). It is guarded by **HTTP Digest auth** + a **source-IP allowlist**
|
||||
(defence-in-depth), but these are *not* the security boundary.
|
||||
- This sharpens under the [[autonomous-direction|unmanned]] roadmap: with no operator, tamper
|
||||
detection via the signed log matters more than perimeter auth.
|
||||
|
||||
## Push authentication — Digest (decided by hardware testing)
|
||||
|
||||
The secret must not be in the URL (sniffable, logged) and the password must not cross the wire in
|
||||
the clear. We **empirically tested the device** to pick the strongest achievable option:
|
||||
|
||||
| Option | Device result |
|
||||
| --- | --- |
|
||||
| HTTPS (self-signed) | ❌ device won't push to a self-signed cert |
|
||||
| **Digest auth** (`auth=2`) | ✅ **works** — full 401-nonce challenge/response |
|
||||
| Basic auth | ✅ works (but password base64 on the wire) |
|
||||
| URL token | rejected by design (visible in URL/logs) |
|
||||
|
||||
→ **HTTP Digest** (MD5, qop=auth). The password is never sent (only a nonce-keyed hash); nonces
|
||||
are **single-use** (replay resistance). Per-device credentials (`pushUser`/`pushPassword`) are
|
||||
generated by the backend on **device assign**, written to the device's `input_link_url` config,
|
||||
and stored in `lane_devices` — the admin never types a URL or secret. HTTPS would be stronger but
|
||||
the device can't do it here; Digest + the signed log is the practical answer on a flat network.
|
||||
See `apps/server/src/digest-auth.ts`.
|
||||
|
||||
## Dingtian config-write gotchas (cost a lot of debugging)
|
||||
|
||||
Writing the device's config API (`/api/v2/config_set.cgi`) has two non-obvious traps — both now
|
||||
handled in the driver:
|
||||
|
||||
1. **Content-Length is mandatory.** The device's embedded HTTP server does **not** accept chunked
|
||||
request bodies. Node uses chunked encoding when `Content-Length` is absent, so the device
|
||||
silently ignores the body and returns `{"status":0}` anyway — the write looks successful but
|
||||
nothing changes. Always set `Content-Length`.
|
||||
2. **The `pass` field caps at 31 chars** (longer is silently truncated → Digest mismatch). The
|
||||
generated push password is 24 hex chars (96 bits).
|
||||
3. (Also: the device reboots on apply, so the driver writes then **polls until the change is
|
||||
verified**, retrying — back-to-back writes onto a rebooting device are lost.)
|
||||
|
||||
## Status
|
||||
|
||||
Input push **verified on hardware** (all 4 inputs, real presses reaching the backend). The entry
|
||||
Input push **verified on hardware** with Digest auth (all 4 inputs, real presses authenticated, no
|
||||
failures). The entry
|
||||
flow itself (signed event + ticket print + `pulseOpen`) is the next build — see [[dingtian-relay]].
|
||||
|
||||
+17
@@ -145,3 +145,20 @@ model recorded in [[device-input-flow]]: flat network / no VLAN → backend is s
|
||||
of truth, every open is a signed event (out-of-band open = anomaly); push endpoint
|
||||
not behind cookie auth (machine call), shared-secret available as defence-in-depth.
|
||||
Next: wire signed event + ticket print + pulseOpen.
|
||||
|
||||
## [2026-06-15] feature | Dingtian push auth via HTTP Digest (hardware-tested)
|
||||
Secured the device→backend input push. Empirically tested auth options on the
|
||||
device: HTTPS-to-self-signed FAILS, Basic works, **Digest works** → chose Digest
|
||||
(MD5, qop=auth): password never on the wire, single-use nonces. Backend
|
||||
digest-auth.ts (challenge/verify) + source-IP allowlist on the push route;
|
||||
per-device pushUser/pushPassword generated on assign, written to the device and
|
||||
stored in lane_devices (admin never types a URL/secret). Driver
|
||||
configureInputPush now sets auth=2 + creds; the assign flow auto-configures the
|
||||
device and persists the creds (net.ts derives the backend IP on the device's
|
||||
subnet). Removed the earlier URL-token approach (token in URL is sniffable/logged).
|
||||
TWO HARD-WON DEVICE BUGS fixed: (1) config_set requires an explicit Content-Length
|
||||
— the device silently ignores chunked bodies (Node's default), which masqueraded
|
||||
as "writes don't apply" all session; (2) the `pass` field caps at 31 chars →
|
||||
use a 24-char password. Driver #writeConfig now polls-until-verified (device
|
||||
reboots on apply). VERIFIED on hardware: assign auto-configures the device, then
|
||||
all 4 inputs push with Digest auth, zero failures. Recorded in [[device-input-flow]].
|
||||
|
||||
Reference in New Issue
Block a user