feat(devices): K200L printer driver — live cover/paper status from the J-Speed LAN board

The park-buzi printer is a K200L (Xprinter/ICS XP-K200L; its LAN board and USB
descriptor call it "POS-80"). Its board serves the Rongta's five-row status table
under /prt_status.htm — but the reply carries no HTTP status line or headers, which
node:http rejects, so the Rongta driver could never read it and the unit was filed
in July as "no status page → generic driver" (reachability only).

New `k200l` driver (printer-k200l.ts): prints through the generic ESC/POS device
(same bytes, TCP 9100 or usblp) and reads the page over a raw socket, tolerant of
both the headerless and a proper HTTP reply. Mapping mirrors the Rongta: board
unreachable → offline; page not understood → degraded, never ready; any fault →
degraded naming it; USB → reachability floor. The Rongta driver is untouched.
Tests replay the captured headerless page (devices suite 76). Live against the
lab unit: ready; with the cover open the board reports cover open, paper out,
off-line.

Wiki: new k200l-printer entity (names, network setup from factory
192.168.123.100, board quirks, status page, what it means for park-buzi — over
USB the app never saw cover/paper state at all), cross-links on the Rongta,
status-monitoring, USB-transport and WSL-networking pages (parking-net pinned to
eth1 while the LAN NIC is eth0), index.

Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU

wiki/index.md

@@ -46,6 +46,7 @@ Counts: 4 sources · 19 entities · 47 concepts · 8 decision records.
 - [[dingtian-relay]] — ✅ CHOSEN access controller; decoupled inputs solve the button blocker (driver verified on hardware); spare relays drive aux outputs (`setAux`).
 - [[hikvision-radar]] — vehicle-presence radar on a Dingtian input; the entry presence gate (per-input active-level caveat).
 - [[rongta-printer]] — ✅ CHOSEN 80mm thermal printer; ESC/POS over raw TCP 9100 (or local USB, see [[printer-usb-transport]]); driver written, one unit reachable at 10.0.10.6.
+- [[k200l-printer]] — the park-buzi printer identified (2026-09-09): Xprinter/ICS K200L, USB id 1fc9:2016 "POS-80", J-Speed LAN board at 192.168.123.100 (DHCP off, web config on :80); status page `/prt_status.htm` (Rongta's rows, headerless HTTP) → own `k200l` driver with raw-socket fetch; over USB reachability only, so cover-open never showed at park-buzi.
 - [[bom]] — reference bill of materials (barrier, loops, controller, readers, payment, host, network).
 
 ## Concepts — foundational forces
@@ -65,6 +66,7 @@ Counts: 4 sources · 19 entities · 47 concepts · 8 decision records.
 - [[device-adapter-pattern]] — business logic talks to interfaces; swap hardware → new adapter.
 - [[device-registry]] — catalog of selectable drivers per category (admin-configurable).
 - [[first-run-setup]] — admin adds controllers + binds readers/cameras to relays from the catalog at install.
+- [[site-device-installation]] — FIELD RUNBOOK (2026-09-09): per device — factory address + credentials, the tool needed, what the wizard configures itself vs what is done by hand on the device, known traps; address plan, order of work on site, gaps to fill. Dingtian relay, DT-008 readers, Hikvision camera, radar, K200L / Rongta / Cashino printers.
 - [[device-input-flow]] — button → device push → backend decides → relay; backend is source of truth.
 - [[device-discovery]] — optional driver capability to scan the LAN (no current driver uses it; UHPPOTE was the example).
 - [[barrier-not-a-door]] — never timed-close a barrier; safety lives in barrier firmware.