feat(anpr): subscriber-entry bridge + admin disable toggle

Wire the lane camera's vehicle event into the gated subscription flow: on a
vehicle/active push from an opt-in (config.anpr) camera, AnprBridge pulls a fresh
snapshot, runs ANPR, applies a stricter entry confidence floor, debounces, and —
matching the plate to a subscription BEFORE emitting — emits a kind:"plate" read.
The existing ReadDispatcher -> SubscriptionFlow then signs the entry/exit and opens
the barrier. A plate is never the sole authority: it routes through the same gate
(active/window/blocklist/car-count) as any credential. Fail-soft, fire-and-forget,
subscriber-only by construction. Field-verified end to end (plate AA504LX opened the
entry barrier and appended a signed vehicle_entry).

Add an admin master switch (site_config.anpr_entry_enabled, default ON) in Site
Settings that disables ONLY the barrier-driving bridge; advisory snapshot-ANPR and
lane busy/free are unaffected. Read live per event, so toggling takes effect with no
restart. Migration 0013 (additive ALTER ADD COLUMN, default 1).

- New: apps/server/src/anpr-entry.ts (AnprBridge) + tests (9)
- hikvision-alarm.ts hands vehicle detections to the bridge (fire-and-forget) + wiring tests (3)
- server.ts reorders the read flows above the hik-alarm registration
- snapshot.ts exports buildCamera for reuse
- env: VISION_ENTRY_MIN_CONFIDENCE (0.85), ANPR_DEBOUNCE_MS (12000)
- site route + SiteSettings checkbox + i18n (sq/en parity)
- wiki: lane-presence-and-anpr-entry / lpr-camera / index / log -> BUILT

Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V

apps/server/.env.example

@@ -56,4 +56,10 @@ WS_ALLOWED_ORIGINS=http://localhost:5173,tauri://localhost,http://tauri.localhos
 # VISION_ENABLED=1                       # master switch — nothing runs without it
 # VISION_URL=http://127.0.0.1:8089       # must match apps/vision VISION_HOST:VISION_PORT
 # VISION_TIMEOUT_MS=1500                 # per-request cap so a slow call can't hang the lane
-# VISION_MIN_CONFIDENCE=0.5              # confidence floor; keep in sync with the service
+# VISION_MIN_CONFIDENCE=0.5              # advisory confidence floor; keep in sync with the service
+#
+# ANPR subscriber-entry bridge (anpr-entry.ts): a subscriber's plate, read off a lane
+# camera's vehicle detection, admits them through the gated SubscriptionFlow. Opt-in per
+# camera (the camera's config.anpr checkbox in Setup); the camera must be BOUND to a relay.
+# VISION_ENTRY_MIN_CONFIDENCE=0.85       # stricter floor for a BARRIER-driving read (near-miss → falls back to card/QR)
+# ANPR_DEBOUNCE_MS=12000                 # same plate/camera within this window = ONE presentation (camera re-fires ~1Hz)

apps/server/src/anpr-entry.test.ts

@@ -0,0 +1,191 @@
+import { afterEach, beforeEach, describe, expect, it, vi } from "vitest";
+import { randomUUID } from "node:crypto";
+import { devices, deviceEvents as deviceEventsTable, eq, siteConfig, type Db } from "@parking/db";
+import { createTestDb } from "@parking/db/testing";
+import { deviceEvents, type DeviceReadEvent } from "./device-events.js";
+import { silentLogger } from "./test-helpers.js";
+import type { VisionClient, VisionResult } from "./vision-client.js";
+import type { SubscriptionFlow, SubscriptionMatch } from "./subscription-flow.js";
+
+// The ANPR bridge: a camera vehicle detection → (opt-in) snapshot → plate → MATCH a
+// subscriber → emit a plate read. We mock the camera build (buildCamera) so no real
+// snapshot HTTP is made, and pass fake Vision/Subscription so the test is the bridge's
+// own logic only. See anpr-entry.ts.
+
+// Mock buildCamera so the bridge gets a fake camera whose captureSnapshot is a stub
+// (no registry, no network). The factory returns a fresh shot each call.
+const captureSnapshot = vi.fn(async () => ({ bytes: Buffer.from("jpg"), contentType: "image/jpeg" }));
+vi.mock("./snapshot.js", () => ({
+  buildCamera: () => ({ captureSnapshot }),
+}));
+
+// Import AFTER the mock is registered.
+const { AnprBridge } = await import("./anpr-entry.js");
+
+let db: Db;
+beforeEach(() => {
+  ({ db } = createTestDb());
+  captureSnapshot.mockClear();
+  delete process.env.VISION_ENTRY_MIN_CONFIDENCE;
+  delete process.env.ANPR_DEBOUNCE_MS;
+});
+afterEach(() => {
+  vi.restoreAllMocks();
+});
+
+/** A camera bound to an entry relay; `anpr` toggles the opt-in flag. */
+function seedCamera(opts: { anpr?: boolean } = {}): string {
+  const controllerId = randomUUID();
+  db.insert(devices).values({
+    id: controllerId,
+    category: "access",
+    driverId: "dingtian",
+    config: { host: "10.0.0.5", relays: [{ relay: 1, direction: "entry" }] },
+    enabled: true,
+  }).run();
+  const camId = randomUUID();
+  db.insert(devices).values({
+    id: camId,
+    category: "camera",
+    driverId: "hikvision",
+    config: { host: "10.0.0.9", controllerId, relay: 1, ...(opts.anpr ? { anpr: true } : {}) },
+    enabled: true,
+  }).run();
+  return camId;
+}
+
+/** A fake VisionClient: enabled, returning a chosen plate/confidence (or null). */
+function fakeVision(opts: { enabled?: boolean; plate?: string; confidence?: number } = {}): VisionClient {
+  const enabled = opts.enabled ?? true;
+  const result: VisionResult | null =
+    opts.plate == null
+      ? null
+      : {
+          plate: { text: opts.plate, confidence: opts.confidence ?? 0.99 },
+          plates: [],
+          lowConfidence: false,
+          modelVersion: "test",
+          tookMs: 1,
+        };
+  return {
+    enabled,
+    analyze: vi.fn(async () => (enabled ? result : null)),
+  } as unknown as VisionClient;
+}
+
+/** A fake SubscriptionFlow: only `match()` is called by the bridge. */
+function fakeSubFlow(match: SubscriptionMatch | null): SubscriptionFlow {
+  return { match: vi.fn(() => match) } as unknown as SubscriptionFlow;
+}
+
+const SUB_MATCH: SubscriptionMatch = { subscriptionId: "sub-1", carKey: "AA111BB", via: "plate" };
+
+/** Capture read events emitted during `fn` (async). */
+async function captureReads(fn: () => Promise<void>): Promise<DeviceReadEvent[]> {
+  const got: DeviceReadEvent[] = [];
+  const off = deviceEvents.onRead((e) => got.push(e));
+  try {
+    await fn();
+  } finally {
+    off();
+  }
+  return got;
+}
+
+describe("AnprBridge", () => {
+  it("does nothing for an opt-OUT camera (no anpr flag) — no analyze, no read", async () => {
+    const cam = seedCamera({ anpr: false });
+    const vision = fakeVision({ plate: "AA111BB" });
+    const bridge = new AnprBridge(db, vision, fakeSubFlow(SUB_MATCH), silentLogger());
+
+    const reads = await captureReads(() => bridge.onVehicleDetected(cam));
+    expect(reads).toEqual([]);
+    expect(vision.analyze).not.toHaveBeenCalled();
+    expect(captureSnapshot).not.toHaveBeenCalled();
+  });
+
+  it("emits a plate read (upper-cased) for a high-confidence SUBSCRIBER plate", async () => {
+    const cam = seedCamera({ anpr: true });
+    const vision = fakeVision({ plate: " aa111bb ", confidence: 0.97 });
+    const bridge = new AnprBridge(db, vision, fakeSubFlow(SUB_MATCH), silentLogger());
+
+    const reads = await captureReads(() => bridge.onVehicleDetected(cam));
+    expect(reads).toHaveLength(1);
+    expect(reads[0]).toMatchObject({ deviceId: cam, value: "AA111BB", kind: "plate", driverId: "hikvision" });
+  });
+
+  it("ignores a plate below the entry confidence floor", async () => {
+    const cam = seedCamera({ anpr: true });
+    const vision = fakeVision({ plate: "AA111BB", confidence: 0.6 }); // < default 0.85
+    const bridge = new AnprBridge(db, vision, fakeSubFlow(SUB_MATCH), silentLogger());
+
+    const reads = await captureReads(() => bridge.onVehicleDetected(cam));
+    expect(reads).toEqual([]);
+  });
+
+  it("does NOT emit for a plate matching no subscription — records an advisory anpr-skip", async () => {
+    const cam = seedCamera({ anpr: true });
+    const vision = fakeVision({ plate: "ZZ999ZZ", confidence: 0.97 });
+    const bridge = new AnprBridge(db, vision, fakeSubFlow(null), silentLogger());
+
+    const reads = await captureReads(() => bridge.onVehicleDetected(cam));
+    expect(reads).toEqual([]);
+
+    const skips = db.select().from(deviceEventsTable).where(eq(deviceEventsTable.kind, "anpr-skip")).all();
+    expect(skips).toHaveLength(1);
+    expect((skips[0].detail as { plate?: string }).plate).toBe("ZZ999ZZ");
+  });
+
+  it("debounces: two vehicle events within the window analyze/emit at most once", async () => {
+    const cam = seedCamera({ anpr: true });
+    const vision = fakeVision({ plate: "AA111BB", confidence: 0.97 });
+    const bridge = new AnprBridge(db, vision, fakeSubFlow(SUB_MATCH), silentLogger());
+
+    const reads = await captureReads(async () => {
+      await bridge.onVehicleDetected(cam);
+      await bridge.onVehicleDetected(cam); // within the 12s window → suppressed
+    });
+    expect(reads).toHaveLength(1);
+    expect(captureSnapshot).toHaveBeenCalledTimes(1); // 2nd was gated before the snapshot
+  });
+
+  it("is a no-op (no throw) when vision is disabled or reads nothing", async () => {
+    const cam = seedCamera({ anpr: true });
+    const disabled = new AnprBridge(db, fakeVision({ enabled: false, plate: "AA111BB" }), fakeSubFlow(SUB_MATCH), silentLogger());
+    const noPlate = new AnprBridge(db, fakeVision({ plate: undefined }), fakeSubFlow(SUB_MATCH), silentLogger());
+
+    const reads = await captureReads(async () => {
+      await disabled.onVehicleDetected(cam);
+      await noPlate.onVehicleDetected(cam);
+    });
+    expect(reads).toEqual([]);
+  });
+
+  it("never throws on an unknown device id", async () => {
+    const bridge = new AnprBridge(db, fakeVision({ plate: "AA111BB" }), fakeSubFlow(SUB_MATCH), silentLogger());
+    await expect(bridge.onVehicleDetected("nope")).resolves.toBeUndefined();
+  });
+
+  it("does NOTHING when the admin has disabled the bridge (site_config.anprEntryEnabled = false)", async () => {
+    const cam = seedCamera({ anpr: true });
+    db.insert(siteConfig).values({ id: 1, anprEntryEnabled: false }).run();
+    const vision = fakeVision({ plate: "AA111BB", confidence: 0.97 });
+    const bridge = new AnprBridge(db, vision, fakeSubFlow(SUB_MATCH), silentLogger());
+
+    const reads = await captureReads(() => bridge.onVehicleDetected(cam));
+    expect(reads).toEqual([]);
+    // The flag is checked FIRST — no snapshot, no analyze, no match attempt.
+    expect(captureSnapshot).not.toHaveBeenCalled();
+    expect(vision.analyze).not.toHaveBeenCalled();
+  });
+
+  it("still emits when the bridge is explicitly enabled (anprEntryEnabled = true)", async () => {
+    const cam = seedCamera({ anpr: true });
+    db.insert(siteConfig).values({ id: 1, anprEntryEnabled: true }).run();
+    const vision = fakeVision({ plate: "AA111BB", confidence: 0.97 });
+    const bridge = new AnprBridge(db, vision, fakeSubFlow(SUB_MATCH), silentLogger());
+
+    const reads = await captureReads(() => bridge.onVehicleDetected(cam));
+    expect(reads).toHaveLength(1);
+  });
+});

apps/server/src/anpr-entry.ts

@@ -0,0 +1,184 @@
+import { randomUUID } from "node:crypto";
+import { devices, deviceEvents as deviceEventsTable, eq, siteConfig, type Db, type DeviceRow } from "@parking/db";
+import type { FastifyBaseLogger } from "fastify";
+import { deviceEvents, type DeviceReadEvent } from "./device-events.js";
+import { directionOf, type FlowDirection } from "./device-resolve.js";
+import { buildCamera } from "./snapshot.js";
+import type { SubscriptionFlow } from "./subscription-flow.js";
+import type { VisionClient } from "./vision-client.js";
+
+// The ANPR "bridge": a subscriber's plate, read from the lane camera, admits them through
+// the SAME gated SubscriptionFlow a QR/card scan uses. It is the one missing wire between
+// the camera's vehicle PUSH (hikvision-alarm.ts) and the read bus — NOT a new service.
+//
+// On a `vehicle`/`active` event from an OPT-IN camera (config.anpr === true), the bridge:
+//   pull a fresh snapshot → vision.analyze → entry confidence floor → debounce → MATCH the
+//   plate to a subscription → emit a DeviceReadEvent{kind:"plate"} ONLY if it matched.
+// The existing onRead → ReadDispatcher then re-matches and runs the gated SubscriptionFlow
+// (active / window / blocklist / car-count), which signs the entry/exit and opens the relay.
+//
+// INVARIANTS (see wiki/concepts/lane-presence-and-anpr-entry.md §2, append-only-event-chain.md):
+//   - Advisory, never sole authority: the bridge only emitRead()s — the signed decision +
+//     barrier open stay inside the existing flow. A spoofed printed plate is just another
+//     credential through the same gate.
+//   - Subscriber-ONLY: it MATCHES before emitting, so a random plate never reaches the
+//     transient plate-as-ticket exit flow.
+//   - Fail-soft + fire-and-forget: any snapshot/vision error degrades to the card/QR path;
+//     never throws into the push handler, never awaited on the camera's 200 response.
+//   - Opt-in per camera, and debounced (the camera re-fires ~1Hz while a car sits).
+
+/** Camera config flag opting it into the ANPR bridge (same flag advisory ANPR uses). */
+interface CameraConfig {
+  readonly anpr?: boolean;
+  readonly [k: string]: unknown;
+}
+
+/** Stricter-than-advisory confidence floor for a BARRIER-driving plate read. A near-miss
+ *  read falls back to the subscriber's card/QR, so we'd rather skip than wrongly admit.
+ *  Distinct from vision-client's advisory VISION_MIN_CONFIDENCE. */
+function entryMinConfidence(): number {
+  const raw = Number(process.env.VISION_ENTRY_MIN_CONFIDENCE ?? 0.85);
+  return Number.isFinite(raw) && raw > 0 ? raw : 0.85;
+}
+
+/** Same plate/camera within this window = ONE credential presentation. The camera re-fires
+ *  ~1Hz while a car is present; emitting every second would drive repeat entries (a fleet
+ *  sub opens a 2nd occurrence) or exit spam. Required for correctness, not CPU. */
+function debounceMs(): number {
+  const raw = Number(process.env.ANPR_DEBOUNCE_MS ?? 12_000);
+  return Number.isFinite(raw) && raw > 0 ? raw : 12_000;
+}
+
+export class AnprBridge {
+  readonly #db: Db;
+  readonly #vision: VisionClient | null;
+  readonly #subscription: SubscriptionFlow;
+  readonly #logger: FastifyBaseLogger;
+  readonly #entryMinConfidence: number;
+  readonly #debounceMs: number;
+  /** Last-fire timestamps, keyed by deviceId (camera-level, pre-snapshot) AND by
+   *  `deviceId:plate` (post-match) — both gated against #debounceMs. */
+  readonly #lastFire = new Map<string, number>();
+
+  constructor(db: Db, vision: VisionClient | null, subscription: SubscriptionFlow, logger: FastifyBaseLogger) {
+    this.#db = db;
+    this.#vision = vision;
+    this.#subscription = subscription;
+    this.#logger = logger;
+    this.#entryMinConfidence = entryMinConfidence();
+    this.#debounceMs = debounceMs();
+  }
+
+  /**
+   * A camera reported a vehicle. If the camera opts into ANPR, pull a snapshot, read the
+   * plate, and — only if it matches a subscription — emit a plate read onto the bus.
+   * Fire-and-forget; fail-soft. Never throws (the push handler must always 200).
+   */
+  async onVehicleDetected(deviceId: string): Promise<void> {
+    try {
+      if (!this.#vision?.enabled) return; // no recognizer configured
+      // Admin master switch (read LIVE so toggling in Site Settings takes effect with no
+      // restart). Gates ONLY this barrier-driving bridge — advisory snapshot-ANPR and lane
+      // busy/free are unaffected. Absent/unreadable config ⇒ enabled (the default).
+      const site = this.#db.select().from(siteConfig).where(eq(siteConfig.id, 1)).get();
+      if (site && site.anprEntryEnabled === false) return;
+      const row = this.#db.select().from(devices).where(eq(devices.id, deviceId)).get();
+      if (!row || !row.enabled || row.category !== "camera") return;
+      if ((row.config as CameraConfig)?.anpr !== true) return; // opt-in only
+
+      // Camera-level debounce (pre-snapshot): a car re-firing ~1Hz must not pull a
+      // snapshot + analyze every second.
+      if (this.#debounced(deviceId)) return;
+      this.#stamp(deviceId);
+
+      const camera = buildCamera(row);
+      if (!camera) {
+        this.#logger.warn(`anpr-bridge: camera ${deviceId} config won't build`);
+        return;
+      }
+
+      // "both" collapses to entry purely for the capture hint (it doesn't pick the lane —
+      // the gated flow infers the verb from the camera's bound relay direction).
+      const direction: FlowDirection = directionOf(this.#db, row) === "exit" ? "exit" : "entry";
+      const shot = await camera.captureSnapshot({ direction });
+      const result = await this.#vision.analyze(shot.bytes, shot.contentType);
+      if (!result || !result.plate) return; // nothing read
+
+      // Entry floor — stricter than the advisory floor (analyze() still returns the plate
+      // object with its confidence even when its own lowConfidence flag is set).
+      if (result.plate.confidence < this.#entryMinConfidence) {
+        this.#logger.info(
+          `anpr-bridge: plate '${result.plate.text}' below entry floor ` +
+            `(${result.plate.confidence.toFixed(3)} < ${this.#entryMinConfidence}) — ignored`,
+        );
+        return;
+      }
+
+      const plate = result.plate.text.trim().toUpperCase();
+      if (!plate) return;
+
+      const e: DeviceReadEvent = {
+        driverId: row.driverId,
+        deviceId,
+        value: plate,
+        kind: "plate",
+        at: new Date().toISOString(),
+      };
+
+      // MATCH BEFORE EMIT — subscriber-only. A non-subscriber plate records advisory
+      // telemetry and stops; it must NEVER reach the transient plate-as-ticket exit flow.
+      const match = this.#subscription.match(e);
+      if (!match) {
+        this.#recordSkip(deviceId, plate, result.plate.confidence);
+        return;
+      }
+
+      // Plate-level debounce — belt-and-suspenders against a gap that slips the
+      // camera-level gate re-emitting the SAME plate.
+      const plateKey = `${deviceId}:${plate}`;
+      if (this.#debounced(plateKey)) return;
+      this.#stamp(plateKey);
+
+      this.#logger.info(
+        `anpr-bridge: subscriber plate '${plate}' (${result.plate.confidence.toFixed(3)}) → read bus`,
+      );
+      deviceEvents.emitRead(e); // → onRead → ReadDispatcher → gated SubscriptionFlow
+    } catch (err) {
+      // Fail-soft: an ANPR failure degrades to the subscriber's card/QR, never strands the lane.
+      this.#logger.warn(`anpr-bridge failed (${deviceId}): ${(err as Error).message}`);
+    }
+  }
+
+  #debounced(key: string): boolean {
+    const last = this.#lastFire.get(key);
+    return last != null && Date.now() - last < this.#debounceMs;
+  }
+
+  #stamp(key: string): void {
+    this.#lastFire.set(key, Date.now());
+  }
+
+  /** Advisory telemetry: a plate was read at the lane but matched no subscription. Not a
+   *  read on the bus — just a breadcrumb so the operator can see ANPR is working. */
+  #recordSkip(deviceId: string, plate: string, confidence: number): void {
+    this.#logger.info(`anpr-bridge: plate '${plate}' matched no subscription — skipped`);
+    try {
+      this.#db
+        .insert(deviceEventsTable)
+        .values({
+          id: randomUUID(),
+          deviceId,
+          category: "camera",
+          kind: "anpr-skip",
+          detail: { plate, confidence, source: "anpr-bridge", reason: "no subscription match" },
+          occurredAt: new Date().toISOString(),
+        })
+        .run();
+    } catch (err) {
+      this.#logger.error(`anpr-bridge skip-record insert failed: ${(err as Error).message}`);
+    }
+  }
+}
+
+// DeviceRow is re-exported for the test's seed typing convenience.
+export type { DeviceRow };

apps/server/src/routes/hikvision-alarm.test.ts

@@ -1,8 +1,11 @@
-import { afterEach, beforeEach, describe, expect, it } from "vitest";
+import { afterEach, beforeEach, describe, expect, it, vi } from "vitest";
+import Fastify, { type FastifyInstance as RawFastify } from "fastify";
 import { createTestDb } from "@parking/db/testing";
 import { and, eq, inArray, devices, deviceEvents as deviceEventsTable, type Db } from "@parking/db";
 import type { FastifyInstance } from "fastify";
 import { buildServer } from "../server.js";
+import { hikvisionAlarmRoutes } from "./hikvision-alarm.js";
+import type { AnprBridge } from "../anpr-entry.js";
 import { seedUser, login } from "../test-helpers.js";
 
 // Hikvision Alarm Server push ingress. Verifies the discovery endpoint: a vehicle-
@@ -222,3 +225,65 @@ describe("Hikvision Alarm Server push", () => {
     expect(res.statusCode).toBe(401);
   });
 });
+
+// The ANPR bridge is handed each vehicle detection (fire-and-forget). We register the
+// routes on a bare instance with a SPY bridge to assert exactly when it's invoked —
+// only on a vehicle target that isn't `inactive`. (The bridge's own logic is covered in
+// anpr-entry.test.ts.)
+describe("Hikvision Alarm Server → ANPR bridge wiring", () => {
+  let rawApp: RawFastify;
+  let rawDb: Db;
+  let rawClose: () => void;
+  let onVehicleDetected: ReturnType<typeof vi.fn>;
+
+  beforeEach(async () => {
+    const t = createTestDb();
+    rawDb = t.db;
+    rawClose = t.close;
+    onVehicleDetected = vi.fn(async () => {});
+    const bridge = { onVehicleDetected } as unknown as AnprBridge;
+    rawApp = Fastify();
+    await hikvisionAlarmRoutes(rawApp, rawDb, undefined, bridge);
+    await rawApp.ready();
+    rawDb.insert(devices).values({
+      id: CAM_ID,
+      category: "camera",
+      driverId: "hikvision",
+      config: { host: CAM_IP, alarmPushEnabled: true },
+      enabled: true,
+    }).run();
+  });
+  afterEach(async () => {
+    await rawApp.close();
+    rawClose();
+  });
+
+  async function post(payload: string) {
+    return rawApp.inject({
+      method: "POST",
+      url: `/api/devices/hikvision/${CAM_ID}/event`,
+      headers: { "content-type": "application/xml" },
+      payload,
+      remoteAddress: CAM_IP,
+    });
+  }
+
+  it("hands a vehicle (active) detection to the bridge", async () => {
+    const res = await post(VEHICLE_XML);
+    expect(res.statusCode).toBe(200);
+    expect(onVehicleDetected).toHaveBeenCalledTimes(1);
+    expect(onVehicleDetected).toHaveBeenCalledWith(CAM_ID);
+  });
+
+  it("does NOT call the bridge for a human target", async () => {
+    const human = VEHICLE_XML.replace("vehicle", "human");
+    await post(human);
+    expect(onVehicleDetected).not.toHaveBeenCalled();
+  });
+
+  it("does NOT call the bridge on an `inactive` (leave) vehicle event", async () => {
+    const leave = VEHICLE_XML.replace("<eventState>active</eventState>", "<eventState>inactive</eventState>");
+    await post(leave);
+    expect(onVehicleDetected).not.toHaveBeenCalled();
+  });
+});

apps/server/src/routes/hikvision-alarm.ts

@@ -5,6 +5,7 @@ import { deviceEvents } from "../device-events.js";
 import { requirePermission } from "../auth.js";
 import { verifyDigest } from "../digest-auth.js";
 import type { LaneStatus } from "../lane-status.js";
+import type { AnprBridge } from "../anpr-entry.js";
 
 // Hikvision "Alarm Server" event PUSH ingress. The newer-firmware cameras (Event →
 // Smart/VCA with "Detection Target: Human/Vehicle", Notify Surveillance Center, Alarm
@@ -95,7 +96,12 @@ function summarize(body: string): AlarmSummary {
   };
 }
 
-export async function hikvisionAlarmRoutes(app: FastifyInstance, db: Db, laneStatus?: LaneStatus): Promise<void> {
+export async function hikvisionAlarmRoutes(
+  app: FastifyInstance,
+  db: Db,
+  laneStatus?: LaneStatus,
+  anprBridge?: AnprBridge,
+): Promise<void> {
   // Accept ANY content-type as a raw Buffer (the camera may POST application/xml,
   // multipart/form-data with a JPEG, or text). Fastify's default JSON parser would 415
   // or empty these — we want the bytes verbatim. Scoped to THIS app instance via a
@@ -199,14 +205,22 @@ export async function hikvisionAlarmRoutes(app: FastifyInstance, db: Db, laneSta
     // for the booth barrier lights). Only on a vehicle target that's `active` — an
     // `inactive` (leave) isn't sent by this camera class, so the lane auto-clears on a
     // timeout in LaneStatus. We filter to vehicle per the booth's "vehicle only" intent.
-    if (
-      laneStatus &&
+    const isVehicleActive =
       (summary.target ?? "").toLowerCase() === "vehicle" &&
-      (summary.eventState ?? "active").toLowerCase() !== "inactive"
-    ) {
+      (summary.eventState ?? "active").toLowerCase() !== "inactive";
+    if (laneStatus && isVehicleActive) {
       laneStatus.vehicleDetected(deviceId);
     }
 
+    // ANPR BRIDGE: on a vehicle detection, if this camera opts into ANPR (config.anpr),
+    // pull a snapshot → read the plate → if it matches a SUBSCRIBER, emit a plate read
+    // onto the bus, which the existing gated SubscriptionFlow turns into an entry/exit +
+    // barrier open. Fire-and-forget — NEVER awaited on the 200 path (the camera must get
+    // a prompt ack or it retry-storms), and fail-soft inside the bridge. See anpr-entry.ts.
+    if (anprBridge && isVehicleActive) {
+      void anprBridge.onVehicleDetected(deviceId);
+    }
+
     // Surface on the in-process bus as a generic breadcrumb so a live listener can show
     // "camera saw a vehicle". NOT a DeviceReadEvent yet — that (plate identity driving
     // entry/exit) is the deliberate next step once we know the real payload.

apps/server/src/routes/site.ts

@@ -32,6 +32,9 @@ interface SiteConfigBody extends Partial<Record<TextField, string | null>> {
   /** Reserve a spot in occupancy for each active subscriber's car(s), even when not
    *  parked — so transients see "full" sooner and the subscriber's spot is held. */
   reserveSubscriberSpots?: boolean;
+  /** Master switch for the ANPR subscriber-entry bridge (auto-open on a subscriber's
+   *  plate read). OFF → subscribers fall back to card/QR; advisory ANPR still records. */
+  anprEntryEnabled?: boolean;
 }
 
 /** Shape returned by GET/PUT: capacity + the booth flag + the subscription default
@@ -41,6 +44,7 @@ type SiteConfig = {
   exitVoucherDefault: boolean;
   subscriptionMonthlyPriceMinor: number | null;
   reserveSubscriberSpots: boolean;
+  anprEntryEnabled: boolean;
 } & Record<TextField, string | null>;
 
 function toSiteConfig(row: typeof siteConfig.$inferSelect | undefined): SiteConfig {
@@ -49,6 +53,7 @@ function toSiteConfig(row: typeof siteConfig.$inferSelect | undefined): SiteConf
     exitVoucherDefault: row?.exitVoucherDefault ?? false,
     subscriptionMonthlyPriceMinor: row?.subscriptionMonthlyPriceMinor ?? null,
     reserveSubscriberSpots: row?.reserveSubscriberSpots ?? false,
+    anprEntryEnabled: row?.anprEntryEnabled ?? true,
   } as SiteConfig;
   for (const f of TEXT_FIELDS) out[f] = row?.[f] ?? null;
   return out;
@@ -106,6 +111,12 @@ export async function siteRoutes(app: FastifyInstance, db: Db): Promise<void> {
       }
       patch.reserveSubscriberSpots = body.reserveSubscriberSpots;
     }
+    if ("anprEntryEnabled" in body) {
+      if (typeof body.anprEntryEnabled !== "boolean") {
+        return reply.code(400).send({ error: "anprEntryEnabled must be a boolean" });
+      }
+      patch.anprEntryEnabled = body.anprEntryEnabled;
+    }
     for (const f of TEXT_FIELDS) {
       if (f in body) patch[f] = normText(body[f]);
     }

apps/server/src/server.ts

@@ -26,6 +26,7 @@ import { roleRoutes } from "./routes/roles.js";
 import { deviceRoutes } from "./routes/devices.js";
 import { hikvisionAlarmRoutes } from "./routes/hikvision-alarm.js";
 import { LaneStatus } from "./lane-status.js";
+import { AnprBridge } from "./anpr-entry.js";
 import { eventRoutes } from "./routes/events.js";
 import { reportRoutes } from "./routes/reports.js";
 import { recycleBinRoutes } from "./routes/recycle-bin.js";
@@ -121,11 +122,9 @@ export async function buildServer(opts: BuildOptions = {}): Promise<FastifyInsta
   const laneStatus = new LaneStatus(db, app.log);
   app.addHook("onClose", async () => laneStatus.stop());
 
-  // Hikvision "Alarm Server" event push: the camera POSTs an EventNotificationAlert on
-  // each detected target (vehicle). Source-IP guarded + optional Digest; records the raw
-  // payload as a `kind:"alarm"` device_event AND drives lane busy/free for vehicles.
-  // See routes/hikvision-alarm.ts.
-  await hikvisionAlarmRoutes(app, db, laneStatus);
+  // NB: the Hikvision Alarm Server routes are registered LOWER DOWN — after the read
+  // flows are constructed — because the ANPR bridge they carry depends on the
+  // SubscriptionFlow. See the hikvisionAlarmRoutes() call below the read-flow wiring.
 
   // Live printer-status monitor: polls printers (paper/cover/cutter/offline) and
   // pushes changes to the booth UI. setupRoutes() has already registered the
@@ -199,6 +198,19 @@ export async function buildServer(opts: BuildOptions = {}): Promise<FastifyInsta
   });
   app.addHook("onClose", async () => unsubscribeRead());
 
+  // ANPR bridge: a subscriber's plate, read off the lane camera's vehicle detection,
+  // admits them through the SAME gated SubscriptionFlow a QR/card scan uses (it emits a
+  // plate read onto the bus, which the dispatcher above turns into a gated entry/exit).
+  // Advisory + fail-soft + subscriber-only — never the sole reason a barrier opens. Needs
+  // the subscriptionFlow constructed just above. See anpr-entry.ts.
+  const anprBridge = new AnprBridge(db, visionClient, subscriptionFlow, app.log);
+
+  // Hikvision "Alarm Server" event push: the camera POSTs an EventNotificationAlert on
+  // each detected target (vehicle). Source-IP guarded + optional Digest; records the raw
+  // payload as a `kind:"alarm"` device_event, drives lane busy/free, AND hands a vehicle
+  // detection to the ANPR bridge above. See routes/hikvision-alarm.ts.
+  await hikvisionAlarmRoutes(app, db, laneStatus, anprBridge);
+
   // Credential capture ("enroll a card"): lets the operator present an RFID card to a
   // CHOSEN reader to populate a subscription credential, without blocking the other
   // reader's live flow. Single-shot + TTL. See credential-capture.ts.

apps/server/src/snapshot.ts

@@ -141,8 +141,9 @@ async function recognizePlate(
   }
 }
 
-/** Build a live camera adapter from a resolved devices row, or null. */
-function buildCamera(row: { driverId: string; config: unknown }): CameraDevice | null {
+/** Build a live camera adapter from a resolved devices row, or null. Exported so the
+ *  ANPR bridge (anpr-entry.ts) reuses the identical registry-build-or-null logic. */
+export function buildCamera(row: { driverId: string; config: unknown }): CameraDevice | null {
   const driver = registry.get(row.driverId);
   if (!driver) return null;
   try {

apps/web/src/SiteSettings.tsx

@@ -26,6 +26,7 @@ export function SiteSettings({ canEdit }: { canEdit: boolean }) {
   const [meta, setMeta] = useState<Record<string, string>>({});
   const [exitVoucherDefault, setExitVoucherDefault] = useState(false);
   const [reserveSubs, setReserveSubs] = useState(false);
+  const [anprEntry, setAnprEntry] = useState(true);
   const [msg, setMsg] = useState<string | null>(null);
 
   function reload() {
@@ -38,6 +39,7 @@ export function SiteSettings({ canEdit }: { canEdit: boolean }) {
         setCapInput(c.capacity == null ? "" : String(c.capacity));
         setExitVoucherDefault(c.exitVoucherDefault);
         setReserveSubs(c.reserveSubscriberSpots);
+        setAnprEntry(c.anprEntryEnabled);
         const m: Record<string, string> = {};
         for (const { key } of META_FIELDS) m[key] = c[key] == null ? "" : String(c[key]);
         setMeta(m);
@@ -52,6 +54,7 @@ export function SiteSettings({ canEdit }: { canEdit: boolean }) {
       capacity: raw === "" ? null : Math.round(Number(raw)),
       exitVoucherDefault,
       reserveSubscriberSpots: reserveSubs,
+      anprEntryEnabled: anprEntry,
     };
     // Send each metadata field; "" → null is applied server-side.
     for (const { key } of META_FIELDS) (patch as Record<string, string | null>)[key] = meta[key] ?? "";
@@ -112,6 +115,18 @@ export function SiteSettings({ canEdit }: { canEdit: boolean }) {
               <span className="hint block">{t("site.reserveSubsHint")}</span>
             </span>
           </label>
+          <label className="flex items-start gap-2 text-[12px] text-term-text">
+            <input
+              type="checkbox"
+              className="mt-0.5 accent-term-amber"
+              checked={anprEntry}
+              onChange={(e) => setAnprEntry(e.target.checked)}
+            />
+            <span>
+              {t("site.anprEntry")}
+              <span className="hint block">{t("site.anprEntryHint")}</span>
+            </span>
+          </label>
           <div className="border-t border-term-border pt-3 text-[11px] uppercase tracking-wider text-term-muted">
             {t("site.parkDetails")}
           </div>

apps/web/src/api.ts

@@ -943,6 +943,8 @@ export interface SiteConfig {
   subscriptionMonthlyPriceMinor: number | null;
   /** Reserve a spot for each active subscriber's car(s) in the occupancy/full gate. */
   reserveSubscriberSpots: boolean;
+  /** Master switch for the ANPR subscriber-entry bridge (auto-open on a plate read). */
+  anprEntryEnabled: boolean;
   parkName: string | null;
   operatorName: string | null;
   /** NIUS — Albanian tax/identification number. */

apps/web/src/lib/i18n/en.ts

@@ -532,6 +532,8 @@ export const en: Catalog = {
     printExitHint: "(booth far from exit → customer self-exits with a voucher)",
     reserveSubs: "Reserve subscriber spots",
     reserveSubsHint: "Hold a spot for each active subscriber's car(s) even when they're not parked — transients see 'full' sooner. Off: only cars inside count (handle overflow by valet).",
+    anprEntry: "Auto-open for subscriber plates (ANPR)",
+    anprEntryHint: "When on, a subscriber's plate read by a lane camera opens the barrier through the normal subscription gate. Off: subscribers must use their card/QR. Plate snapshots are still recorded either way.",
     parkDetails: "Park details (optional — shown on tickets/receipts)",
     save: "Save",
     saved: "Saved.",

apps/web/src/lib/i18n/sq.ts

@@ -543,6 +543,8 @@ export const sq = {
     printExitHint: "(klienti skanon biletën në dalje)",
     reserveSubs: "Rezervo vendet e abonentëve",
     reserveSubsHint: "Mban një vend për makinat e çdo abonenti aktiv edhe kur nuk janë të parkuar — kalimtarët e shohin 'plot' më shpejt. Joaktiv: numërohen vetëm makinat brenda (mbingarkesa menaxhohet me parkim manual).",
+    anprEntry: "Hapje automatike për targat e abonentëve (ANPR)",
+    anprEntryHint: "Kur është aktiv, targa e një abonenti e lexuar nga kamera e korsisë hap barrierën përmes portës normale të abonimit. Joaktiv: abonentët duhet të përdorin kartën/QR-në. Fotot e targave regjistrohen gjithsesi.",
     parkDetails: "Të dhënat e parkimit (opsionale — shfaqen në bileta/fatura)",
     save: "Ruaj",
     saved: "U ruajt.",