An early wrong assumption named the QR/RFID access reader "GEE" /
"GEE/Fondvision" / "GEE-QR-ER80" (and summarized a raw GEE PDF as its
datasheet). There is no GEE device — it's the Dingtian DT-008
(dingtian-tech.com/en_us/qr_code_reader.html), the same vendor as the relay
board, which is why it integrates the identical HTTP-GET-push way.
Code:
- Driver symbol geeQrReaderDriver → dingtianQrReaderDriver; label →
"Dingtian DT-008 QR/RFID reader (HTTP push)"; comments/description rewritten
to the real DT-008 facts (Wiegand 26/34, TCP/IP, USB, RS485 — not RS-232;
QR/barcode + ID/IC/NFC — not DataMatrix/1D).
- Persisted driverId "gee-qr-reader" → "dingtian-qr-reader" (the registry
lookup key + the row created on assign in qr-reader.ts).
- Migration 0015 rewrites existing devices.driver_id rows so configured readers
keep resolving (applied to the dev DB — 2 rows; the booth applies it on boot).
Behaviour is unchanged: naming + the persisted id only.
Wiki + memory:
- Renamed entities/gee-qr-er80.md → dingtian-dt008-reader.md and
sources/gee-qr-er80.md → dingtian-dt008.md; rewrote both to the real DT-008
product-page specs while KEEPING all the verified-on-hardware protocol facts
(cjihao serial, .jsp path, Connection: close). Fixed every cross-reference +
"GEE" mention in 6 other pages. Memory gee-reader-serial-binding →
dingtian-reader-serial-binding. The only surviving "GEE" mentions are
deliberate naming-correction notes, the raw PDF filename, and the
append-only log history.
Full workspace build/lint/test green; dev DB readers verified resolving to the
registered dingtian-qr-reader driver.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Rounds out subscriptions across enrollment, the barrier flow, and the booth.
- RFID credentials enabled with a "Read card" enrollment flow: the operator
arms ONE chosen reader (CredentialCapture, single-shot + ~30s TTL); that
reader's next read is captured into the form and NOT dispatched to the access
flow — the OTHER reader keeps serving live entry/exit. Routes:
/api/subscriptions/readers + /capture/{arm,cancel} + poll.
- Enter with one credential, exit with another: sessions are keyed by a
per-occurrence id (SUBSESS-<short>), not the credential value, with
permitId in the payload. Direction is decided by the barrier the reader sits
at (entry-lane→entry, exit-lane→exit; "both" infers); a fleet (maxConcurrent>1)
admits several cars and exits any with any credential, FIFO (oldest first).
- Booth treats a subscription occurrence as PREPAID: never quoted/charged; the
pay/exit modal shows a subscription mode (snapshots + a single audited
Open-barrier action) to assist a faulty exit reader / missing card;
reopenBarrier authorizes paidAt!=null OR subscription. Active Sessions badges
"abonim" and labels by holder name (not the raw key).
- Plus a per-read diagnostic log in the QR-reader route (serial → device →
verdict/dir), which surfaced the earlier duplicate-reader-IP misroute.
Verified via buildServer+inject + reader-scan/TCP-capture simulations
(enrollment isolation, cross-credential + FIFO fleet, prepaid-not-charged,
subscription reopen, unpaid-transient guard). Updated wiki (subscription,
booth-exit-flow). No migration.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
A parking lot is one pool of spaces with a flexible set of entry/exit
points — no "lane". Direction is a property of each RELAY inside an access
controller; readers/cameras bind to a controller relay and inherit it.
Schema:
- drop `lane` from ledger_events, device_events, sessions
- rename lane_devices -> devices (no lane/direction columns)
- access config.relays=[{relay,direction,button?}]; reader/camera
config.controllerId+relay binding
- fresh 0000_baseline migration (history reset; dev data was throwaway)
Signed ledger:
- remove `lane` from canonicalize(); bump signer keyId sw-hmac-v1 -> v2
(v1 events won't verify under v2 — intentional, gated per-event by keyId)
Server:
- new device-resolve.ts (replaces lane-map.ts): relayForButton,
relayForDevice, firstRelayByDirection, devicesByDirection
- entry-flow: button terminal -> its relay; exit/permit: reader's bound
relay; dispatcher resolves the bound relay + inherited direction
- camera snapshots fire by direction site-wide, async, never block open
- DeviceConfig widened to nested JSON for relays[]
Web:
- wizard: no lane selector; add controllers (relay map + entry-button
terminal) first, then bind readers/cameras/printers to a controller relay
Wiki: new entry-exit-points.md (replaces lane-direction); reworked
entry-exit-readers, parking-session, first-run-setup, device-registry,
append-only-event-chain, device-events; removed stale lane/LaneMap mentions.
The reader sends Connection: keep-alive but only acts on the verdict (beep,
output) once the TCP socket closes. Fastify's default kept the connection alive,
so the reader waited out a ~10s keep-alive timeout before beeping — even though
the server replied in ~15ms. Every vendor demo replies Connection: close and
shuts the socket. Set reply.header('connection','close') on the QR endpoint.
Verified the header is now sent; symptom was correct accept/reject with a ~10s
lag before the beep.
The QR reader is a push device and the setup wizard assigns random-UUID ids, so
'id = serial' can't be set via the UI. Add a dedicated gee-qr-reader driver
(reader category) with a single 'serial' config field; the admin assigns it
normally and enters the device's serial (its cjihao).
The QR endpoint now resolves the lane by matching lane_devices.config.serial to
the scan's cjihao (instead of row id == cjihao), so no DB hand-editing. An
unassigned serial resolves to no lane -> status:0, gracefully.
Verified via inject through the real /api/setup/assign: assign {serial:
H05M2AFA} -> .jsp scan with a matching permit QR -> status:1 (accept) + open;
re-scan -> permit exit; unknown card -> status:0; unassigned serial -> status:0.
Hardware capture: the GEE/Fondvision reader (serial H05M2AFA) scans + sends +
beeps fine — the earlier 'no beep' was just nothing answering :3000. Real
request: GET /qa/mcardsea.jsp?cardid=...&cjihao=H05M2AFA&... — the 'server
language' setting (JSP here) selects the URL EXTENSION, so it posts .jsp, not
.php. Our route was .php-only and would have 404'd it.
Register the endpoint at php/jsp/asp/aspx/cgi so it works whatever the device is
configured to. cjihao (serial) is the lane key: assign the reader as
lane_devices.id = its serial.
The reader HTTP-GETs on each scan and beeps/acts on our JSON reply (host-in-the-
loop, synchronous). New route GET/POST /qa/mcardsea.php parses the SDK query,
runs the scan through the read dispatcher (permit match -> permit flow; else
transient exit), and replies the SDK verdict: status 1=valid (beep 2x) /
0=invalid (beep 1x), output, time-sync.
Refactored the read flows to return a ReadOutcome {accepted, direction, reason}
so the reply reflects the real accept/reject decision (ReadDispatcher.dispatch,
ExitFlow.handleAt, PermitFlow.run). Fire-and-forget readers ignore it.
Reader's lane is keyed off its serial (cjihao) as lane_devices.id for now;
endpoint is public (reader has no auth, on the device subnet).
Verified via inject: valid permit QR -> status:1 + open; re-scan -> permit exit;
unknown QR -> status:0; barrier-less lane -> status:0.
julian