parking_solution/wiki/entities/k200l-printer.md

type, tags, sources, updated

type	tags	sources	updated
entity	parking hardware printer escpos network usb status		2026-09-09

K200L thermal printer (Xprinter / ICS "XP-K200L") — the park-buzi unit

An 80 mm ESC/POS receipt printer, USB + LAN, sold under several names. Bottom label: "THERMAL RECEIPT PRINTER — Model: K200L — Paper Width: 80mm — Print Speed: 200mm/s — Power Input: 24V 2.5A — Cash Drawer: 24V 1A — Interface: USB+LAN — Command Support: ESC/POS", serial BLU2107080238. Identified on the dev bench 2026-09-09; it is the printer that "goes offline after a paper reload" at park-buzi (printer-usb-transport §Field bug). The lab's older "ICS XP-K200L" (10.0.10.11, the 2026-07 USB truncation work) is the same family.

Three names for one device, all seen on the bench:

Where	What it calls itself
bottom label	K200L
USB descriptor (lsusb)	1fc9:2016 NXP Semiconductors Printer-80 / "Printer POS-80" (0x1fc9 = the NXP controller chip; no brand)
LAN board web UI	"J-Speed Ethernet Interface Module", "Ethernet WebConfig Version 1.02", copyright "POS"

The app driver is k200l ("K200L 80mm thermal printer (Xprinter / ICS, USB+LAN)", packages/devices/src/drivers/printer-k200l.ts). It prints through the shared generic ESC/POS path (identical bytes, TCP 9100 or usblp) and adds live status from the LAN board — see below. Before 2026-09-09 this unit ran on the generic escpos driver (reachability only), which is why the app could never show its cover/paper state.

Network setup (the evening that was never written down)

• Factory address 192.168.123.100/24, DHCP OFF. Nothing announces it; the printer just sits there on a subnet nobody uses. To reach it, give the workstation a second address in 192.168.123.0/24 (Windows: adapter → IPv4 → Advanced → add 192.168.123.101), then open http://192.168.123.100/.
• The web configurator (port 80, no authentication) is a three-frame page: Information (ip_info.htm: MAC, IP, mask, gateway, DHCP on/off, DHCP timeout), Configuration (ip_config.htm: DHCP client on/off + timeout, fixed IP / mask / gateway as four octet fields, Save, Restore Default, cancel), Printer Status (prt_status.htm), Printer Test (prt_test.htm), and a Restart button in the menu.
• Set a fixed address on the device VLAN (park-lab: 10.0.10.7/24, gateway 10.0.10.1) → Save → Restart; then remove the temporary 192.168.123.x address from the workstation. Keep DHCP off — the app addresses printers by IP (rongta-printer §Deployment).
• The self-test page (prt_test.htm / the "Print Test Page" button on the status page) prints the current network settings, so a unit with a forgotten address can be read back that way.
• The board's HTTP server is tiny: the frameset reloads its frames every 1–3 s and the status page every 5 s, and it holds very few connections. Close the browser tab while the app is polling, or connections intermittently time out (seen on the bench: ping fine, port open, every second HTTP connect hanging while the page was open in a browser).

WSL gotcha while doing this (2026-09-09): the dev box then carried BOTH 192.168.123.101 and 10.0.10.203 on eth0, and WSL sourced 10.0.10.x traffic from the 192.168.123 address — the exact wsl-dev-networking source-address bug, except parking-net.service pins eth1 and the mirrored LAN NIC is eth0 now. Symptom: ping works, curl times out. Run the fix for eth0, or drop the temporary address once the printer is moved.

Live status — the /prt_status.htm page

The LAN board serves a five-row table the printer has already decoded from its own sensors:

Cover Is Open      Yes/No
Cutter Error       Yes/No
Paper End          Yes/No
Paper Near End     Yes/No
Printer Off-Line   Yes/No

Same rows, same <TD>label</TD><TD>Yes|No</TD> shape as the Rongta board's /prn_stat.htm (printer-status-monitoring) — only the path differs, which is why nobody found it in July (the Rongta driver looked for /prn_stat.htm, got nothing, and the unit was filed as "serves no status page → generic driver"). Verified on the bench: cover open → Cover Is Open Yes, Paper End Yes, Printer Off-Line Yes within a refresh; cover closed → all No.

Quirk that needs its own fetch code: the board's HTTP reply has no status line and no headers — the body starts at byte 0 (HTTP/0.9 style). Browsers render it; curl reports 000 with an empty body; Node's http client rejects it with "Parse Error: Expected HTTP/, RTSP/ or ICE/". So the k200l driver reads the page over a raw TCP socket (GET … HTTP/1.0, read until the board closes) and accepts both the headerless reply and a proper one. This is the second reason the K200L has its own driver rather than a path option on the Rongta one.

Status mapping (mirrors the Rongta driver, printer-status-monitoring): board unreachable / timeout → offline; page reachable but not the table (non-200, the index page) → degraded "unexpected status page", never ready off a page we didn't read; any Yes → degraded naming the faults ("cover open, paper out, printer off-line"); all No → ready. Over USB there is no page: reachability floor only (ready/offline), same as a USB Rongta.

What this means for the park-buzi bug

At park-buzi this unit ran over USB on the generic driver, i.e. monitored by "does /dev/usb/lpN open". A cover-open / paper-out condition never showed in the app at all — the badge stayed green. So the operators' "printer goes offline after reloading paper" was not the cover state being reported; it was a genuine probe failure whose errno is still unread (site shut down — printer-usb-transport §Field bug has the commands to pull first). Running the unit on LAN with the k200l driver would give the booth a real amber "cover open / paper out" while the roll is changed, and removes the usblp path from the equation altogether — a strong reason to cable it to the device VLAN when the site reopens.

Related: rongta-printer · printer-status-monitoring · printer-usb-transport · printer-roles-failover · network-isolation · wsl-dev-networking · site-device-installation