Cameras (Hikvision) return `Content-Type: image/jpeg; charset="UTF-8"` — a
charset param on a binary body is malformed, and browsers refuse to decode an
<img> declared that way. Old capture code persisted that raw header into
snapshots.content_type (100/101 dev-DB rows); GET /api/snapshots/:id re-emitted
it verbatim, so every legacy snapshot rendered blank in the booth modal.
Capture was already hardened (encodeForStorage re-encodes to a clean
image/jpeg, fail-soft via cleanType), but the serve route trusted the stored
value. Export cleanType and apply it when setting the response header, so a
bare image/jpeg is sent regardless of what was stored — un-breaks all legacy
rows with no data migration. A stored value from an untrusted device is itself
input; normalize on capture AND on serve. Adds cleanType unit tests.
Verified: a previously-unrenderable 2560x1440 row now decodes in-browser.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Retention (keep-last / keep-daily-days) is operational policy the on-site admin
should tune, not a server env var requiring a redeploy -- same reasoning that moved
the target directory to the UI.
- Migration 0017: site_config.backup_keep_last + backup_keep_daily_days (nullable;
null = code default 7 / 30 per field).
- BackupService reads retention fresh each run; status() exposes keepLast +
keepDailyDays. DEFAULT_BACKUP_RETENTION is now a pure code default (env reads gone).
- PUT /api/backup/config accepts keepLast / keepDailyDays (non-negative int, or null
to reset to default; 400 on negative).
- UI: two retention fields on the Backup config card; one Save covers target +
retention. i18n sq + en.
BACKUP_KEY wired into Komodo:
- komodo/resources.toml: BACKUP_KEY=[[park_buzi_backup_key]] (per-booth secret,
alongside JWT / signing keys).
- komodo/.env.komodo.example: documents it as the ONLY backup env var -- escrow it
offsite alongside EVENT_SIGNING_KEY (recovery needs both); target + retention are
admin-chosen in the UI / DB, not env. Server .env.example trimmed to just BACKUP_KEY.
Also carries the small in-progress setup-intro i18n copy trim.
Tests: 218 server tests green, incl. retention persist / reset-to-default / reject-
negative and the updated status shape. Migration applies cleanly (needed a
statement-breakpoint between the two ALTERs). Wiki backup-recovery updated.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The backup destination is now chosen by the on-site admin in the UI (Setup ->
Backup), not a server env var. An env-pinned target defeats the purpose: the admin
can't point backups at a freshly-plugged USB or a NAS mount without editing .env
and restarting. The encryption key stays a server secret.
Target storage:
- New site_config.backup_target_dir (migration 0016, nullable; null = not
configured). BackupService reads it fresh each run, so a UI change takes effect
with no restart. Only BACKUP_KEY stays env -- a key must never live in the DB it
backs up.
Routes:
- PUT /api/backup/config -- set/clear the target (backup:update; upserts id=1).
- POST /api/backup/test -- probe a candidate path server-side (exists / is a
directory / writable) so the admin gets feedback before relying on it.
- status() now exposes targetDir + keyPresent, so the UI distinguishes
'no target set' from 'BACKUP_KEY missing'.
UI (apps/web/src/BackupSettings.tsx):
- A Setup -> Backup tab (gated backup:read): an editable target-path field with a
Test-target probe (localized ok/missing/not-a-dir/not-writable), Save, the status
panel (config state, last-run size/pruned/error, a distinct amber missing-key
warning), a Back up now button, and the restore-is-out-of-band note. Full i18n
(sq + en); nav.backup.
- API client: fetchBackupStatus / setBackupTarget / testBackupTarget / runBackup.
Also includes a small in-progress copy trim to the setup-intro i18n strings.
Verified live with Playwright: typed a path -> Test reported writable -> Save
persisted it -> status reflected it and showed the key-missing warning. Whole
monorepo build/lint/test green. Wiki backup-recovery + open-question #5 updated.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The SQLite DB is the signed append-only ledger, so a disk failure / stolen or
destroyed PC means total revenue-history loss (open-question #5). This is the first
slice of the backup-recovery design: the engine + a local/mounted target + a daily
timer + a manual route.
Engine (apps/server/src/backup.ts):
- Consistent online copy of the live WAL DB via better-sqlite3's native .backup()
(not a raw file copy, which can capture a torn WAL) — the restored copy is a
byte-identical, queryable DB.
- AES-256-GCM with a scrypt-derived key from BACKUP_KEY; self-describing header
(magic|version|salt|iv|...|authTag) so a restore tool needs only the key + file.
Zero new dependencies (Node crypto).
- The plaintext intermediate is kept in scratch (not the removable/network target)
and wiped in a finally, success or fail.
- Retention: keep-last-N + one-per-day within N days.
Wiring:
- BackupService (env config, single in-flight guard, last-success/last-error).
- routes/backup.ts: GET /api/backup/status (backup:read), POST /api/backup/run
(backup:create), 409 when unconfigured. No restore route — restore is an
out-of-band runbook action on a fresh appliance, not a console call.
- New permission resource in @parking/shared.
- server.ts: an unref'd daily timer, a no-op until BACKUP_TARGET_DIR + BACKUP_KEY
are set, deliberately not run at startup (a just-power-cut booth shouldn't write
to a possibly-unmounted disk).
- openRawDb() added to @parking/db/testing (open a file without migrating, for
restore-verification tests).
BACKUP_KEY is deliberately SEPARATE from EVENT_SIGNING_KEY (independent rotation;
backups travel, the signing key shouldn't). SMB/NFS work as mount paths; SFTP +
admin UI + restore runbook are deferred slices. Tests: round-trip byte-identical,
GCM tamper/wrong-key fail, short-key rejected, scratch cleaned, route auth/RBAC +
409. build/lint/test green (212 server tests). Wiki + open-question #5 updated.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
An early wrong assumption named the QR/RFID access reader "GEE" /
"GEE/Fondvision" / "GEE-QR-ER80" (and summarized a raw GEE PDF as its
datasheet). There is no GEE device — it's the Dingtian DT-008
(dingtian-tech.com/en_us/qr_code_reader.html), the same vendor as the relay
board, which is why it integrates the identical HTTP-GET-push way.
Code:
- Driver symbol geeQrReaderDriver → dingtianQrReaderDriver; label →
"Dingtian DT-008 QR/RFID reader (HTTP push)"; comments/description rewritten
to the real DT-008 facts (Wiegand 26/34, TCP/IP, USB, RS485 — not RS-232;
QR/barcode + ID/IC/NFC — not DataMatrix/1D).
- Persisted driverId "gee-qr-reader" → "dingtian-qr-reader" (the registry
lookup key + the row created on assign in qr-reader.ts).
- Migration 0015 rewrites existing devices.driver_id rows so configured readers
keep resolving (applied to the dev DB — 2 rows; the booth applies it on boot).
Behaviour is unchanged: naming + the persisted id only.
Wiki + memory:
- Renamed entities/gee-qr-er80.md → dingtian-dt008-reader.md and
sources/gee-qr-er80.md → dingtian-dt008.md; rewrote both to the real DT-008
product-page specs while KEEPING all the verified-on-hardware protocol facts
(cjihao serial, .jsp path, Connection: close). Fixed every cross-reference +
"GEE" mention in 6 other pages. Memory gee-reader-serial-binding →
dingtian-reader-serial-binding. The only surviving "GEE" mentions are
deliberate naming-correction notes, the raw PDF filename, and the
append-only log history.
Full workspace build/lint/test green; dev DB readers verified resolving to the
registered dingtian-qr-reader driver.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Camera snapshots were stored RAW — the camera's full-res JPEG straight into
the BLOB, no resize/recompress. Measured on the dev DB: 300 snapshots = 81.7 MB
= ~72% of the 114 MB SQLite file (the big ones 2688×1520 / ~600 KB, Hikvision
main stream). They dominated the appliance's single backed-up DB file.
Re-encode on capture (snapshot.ts):
- Downscale each frame to SNAPSHOT_MAX_EDGE (1280px long edge) + recompress at
SNAPSHOT_JPEG_QUALITY (80) via sharp (libvips, Apache-2.0) before storage —
~6-10× smaller (verified 2688×1520 → 1280×724, ~8×), plate still readable,
clean image/jpeg (drops the camera's charset cruft). STORAGE-ONLY: recognition
keeps the ORIGINAL full-res bytes (downscaling hurts OCR). Fail-soft — a
re-encode error stores the original, never drops the snapshot or blocks the
(already-open) path. sharp lives in apps/server (owns the capture path), where
bcrypt already establishes the native-dep pattern.
Disk-pressure retention (snapshot-retention.ts) — a SAFETY VALVE, not the daily
mechanism (the re-encode does that). Daily check reads the DB filesystem used%
(statfs on db.$client.name); no-op unless ≥ SNAPSHOT_DISK_HIGH_PCT (70). Over the
mark: delete the OLDEST until an estimated SNAPSHOT_DISK_FREE_TARGET_PCT (10%) of
disk is freed — never below SNAPSHOT_MIN_KEEP (500) — then VACUUM once to return
space to the OS. A DELETE only frees SQLite pages (disk doesn't drop until VACUUM),
so the loop is driven by estimated freed bytes (SUM(length(bytes))), not a live
disk re-read; the prune owns the DB-locking VACUUM, run daily off-peak. diskUsage
is injectable for tests. None of this touches the signed ledger — snapshots are
unsigned/advisory, referenced only by id.
Tests: encodeForStorage (downscale / clean-type / no-enlarge / fail-soft) +
pruneSnapshots (no-op below mark / delete-oldest-to-target + VACUUM / MIN_KEEP
floor / skip-VACUUM-when-empty). All four snapshot env knobs documented in the
komodo env reference. Full workspace build/lint/test green; the prune smoke-verified
on a scratch DB copy (file shrank after VACUUM).
Existing ~81.7 MB of raw snapshots are unchanged (a one-off re-encode backfill is
a separate optional follow-up). Updated entry-exit-points + technology-stack wiki.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
A round of operator-facing fixes on the booth screen, shift views, and the
font-scale control. (Follows the font-scale feature in f706726, which used CSS
`zoom` — reverted here for the rem approach below.)
Font scaling (the A−/A+ control now actually works without breaking layout):
- The control scaled via CSS `zoom`, which also scaled viewport-locked containers
(h-screen frame, max-h-[90vh] modals) so at 130% modal headers/footers were
pushed off-screen. Reworked to scale TEXT only: converted every `text-[Npx]`
font utility to rem across the web app (~230 sites in 25 files + the
.label/.hint/.btn component classes + body in index.css; 16px root, so 100% is
visually identical), and applyFontScale now sets the ROOT font-size. vh/h-screen
layout stays put, so chrome never clips; tall content scrolls its own container.
Verified at 130%: text 12px→15.6px while the frame stayed viewport-height.
Live feed (event rows):
- Plate, badges and reason now flow inline after the identity and wrap only when
the row runs out of width — no more forced second line when there's empty space.
- Dropped the redundant TARGË via-badge (the plate chip already conveys it).
- Removed the Direction filter group (Hyrje/Dalje) — it duplicated the entry/exit
options already in the Type filter.
Active sessions:
- Rebuilt as a real table (Ticket/subscriber · Plate · Entry · Elapsed) so columns
align and long values (subscriber names, ticket ids) no longer truncate.
- Dropped the status column (an unpaid transient is normal; a subscriber shows ★ +
name; overstay keeps a row tint). Removed the now-redundant status filter; only
the Transient/Subscriber filter remains. Plate is now searchable (uses s.plate).
Shift report (close-shift modal + Shift History + printed Z-report slip):
- Removed the confusing `shitje` (subscription-sales) sub-line — Abonime is the
total; only the out-of-window part is broken out. subscriptionSalesMinor stays in
the signed payload (audit data), just not displayed/printed.
- Show the inherited opening cash ("Arka fillestare") above the expected drawer, so
opening + cash-taken = expected reads clearly. Money values no longer line-wrap.
Subscription edit modal:
- Fixed the 2-col grid alignment: a lone "only one version" cell was shifting every
following row by one column — it now emits a full label+value pair.
Removed orphaned i18n keys (fStatus*, fDir*, srcSubSales) from sq+en (parity kept).
Full workspace build/lint/test green.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
A header A−/value/A+ control scales the whole UI, persisted per user and
restored on login from any booth — cloning the theme-pref pattern end to end.
- DB: users.font_scale (migration 0014; percent, 100 = base, NOT NULL default).
- Server: PUT /api/auth/font-scale (auth-guarded; clamps to 80–160, snaps to a
10-step); fontScale flows through sessionView → login + /me.
- Client: setFontScalePref + applyFontScale; applied in App alongside theme;
FontScaleToggle in the header; i18n sq+en.
Scaling uses CSS `zoom` on the root, NOT root font-size: the app's type is pinned
in px (text-[12px] etc., ~230 spots), which a font-size change would not scale —
so the dense Active-sessions / Live-feed logs stayed tiny. `zoom` scales
everything uniformly (text, spacing, icons) like the browser's Ctrl+/−, which is
the readability win for operators who need larger text.
Tests: 4 font-scale auth-route cases (persist + /me, clamp/snap, 400, default-100).
Full workspace build/lint/test green.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Two booth feed fixes:
- Plate not showing until refresh. Plate recognition is async/advisory
(snapshot.ts recognizePlate → a kind:"read" device_event keyed by the session
identity), so it lands AFTER the entry/exit event already shipped over the WS
without a plate; a refresh re-fetched via the bulk enrich path and showed it.
Added a `plate-recognized` bus event (device-events.ts) emitted when the read
is written; ws.ts forwards it; the client patchPlate(identity, plate)
(live-store) backfills the already-rendered feed row in place and invalidates
the Query-owned active-sessions list. No refresh.
- Plate search didn't filter. Both the live-feed (BoothScreen) and active-sessions
(ActiveSessions) search haystacks matched the wrong field — the displayed plate
is the ENRICHED top-level e.plate/s.plate (set by enrichEvent), not payload.plate
(the plate is unsigned, never in the signed payload). Switched the haystacks to
the displayed field.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The on-screen Hyrje/Dalje barrier lights were 2-state (green=free / red=busy)
off the camera lane-status only — they couldn't show the radar-only "detected,
not yet confirmed" state that makes the physical button lamp (relay 3) blink.
Now they mirror the lamp's 3-state rule per lane:
radar present + camera not busy → BLINK green↔red (~1 Hz)
camera busy → SOLID red
otherwise → SOLID green
End-to-end:
- LanePresence (lane-presence.ts): subscribes to deviceEvents.onInput, resolves
each presence edge to its lane via the new direction-agnostic presenceLaneOf()
(device-resolve.ts) — entry AND exit, unlike the entry-gated relayForPresence
the one-car-one-ticket gate uses — and emits a lane-presence {entry,exit} bus
event on change. Wired in server.ts (start + onClose).
- WS forwards it (hello snapshot + push) into live-store.radar.
- BarrierLight (BoothScreen.tsx) is now 3-state; blinks via the .lane-blink
keyframe (index.css), which holds solid-red under prefers-reduced-motion.
Same input + same rule as the lamp, so the screen and the post never disagree.
A new test (lane-presence.test.ts) caught a real bug: the first cut reused
relayForPresence, so the EXIT lane never resolved (it's entry-gated) and never
blinked — presenceLaneOf fixes it. Covers entry/exit independence, de-dupe
across several radars on one lane, and ignoring non-presence inputs.
Full workspace build/lint/test green (185 server tests). Updated the
button-light-indicator wiki page ("On-screen twin").
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The controller new/edit modal hardcoded both its outputs and its inputs, so an
operator could neither add a generic event-driven relay nor a free-standing input
(e.g. a second radar at the exit). This unifies both into symmetric, first-class
lists. Behaviour for existing booths is unchanged (back-compat, no DB migration).
Outputs — one event→action relays[] list:
- A relay is "when EVENT X happens, do its action": entry/exit/both pulse a
barrier; a new `radarAlert` event drives a non-barrier alert lamp (blink while
its trigger input is active, SOLID once the camera confirms a car).
- Dropped the separate config.buttonLight block — the lamp is just a relays[] row
with direction:"radarAlert" (triggerInput + blink cadence). `alertRelaysOf()`
replaces `buttonLightOf()`; ButtonLightController keeps its proven 3-state
machine (serialized UDP, fail-OFF, hot-reload), now keyed per controllerId:relay
so several alert lamps on one controller run independently. Every barrier
resolver skips radarAlert rows (no auto-open; barrier-not-a-door intact).
Inputs — one first-class config.inputs[] list (the twin of relays[]):
- Each row is { input, role, relay?, kind?, activeLow?, cooldownSec? } with a
"+ Add input" button. role ∈ button | presence | alertTrigger; button/presence
name the relay they serve. An exit radar is just another presence row.
- Keystone `inputsOf(row)`: returns config.inputs[] or SYNTHESIZES it from the
legacy relays[].button/presenceInput/... fields, so relayForButton /
relayForPresence resolve identically from either shape — zero-downtime, no
migration. entry-flow.ts is unchanged (resolves through the same functions).
- Fixed a latent bug this exposed: the alert lamp's camera lock was hardcoded to
the ENTRY camera. Added relays[].lockLane ("entry"|"exit", default entry); the
lamp now locks on its own lane's camera, so an exit radar's lamp tracks the exit
camera. button-light tracks both #entryBusy/#exitBusy.
- Driver: extracted activeLowFrom(config) — merges inputs[] activeLow, legacy
relays[].presenceActiveLow, and the inputActiveLow escape hatch.
UI: the relay dropdown gained a "Radar alert" option (reveals trigger/lock/blink
inputs); InputEditor is rewritten to a generic list (role select folds loop/radar);
i18n sq+en kept at type-parity.
Tests: new device-resolve.test.ts (inputs[] resolution + legacy fallback identical
+ exit-radar resolves to the exit relay); button-light gains a two-independent-
alert-relays case and an exit-lamp lockLane case; access-dingtian gains
activeLowFrom cases. Full workspace build/lint/test green (i18n parity included).
Wiki + memory updated (button-light-indicator, entry-double-press, dingtian-relay).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
A shared entry/exit lane has both an entry and an exit camera on ONE lane: a
subscriber driving IN is admitted by the entry cam, but the exit cam sees the same
car leaving its frame and phantom-EXITs the occurrence just opened (its back plate).
Separate RECOGNITION from AUTO-OPEN per camera:
- config.anpr (unchanged) = run snapshots through the recognizer, record the plate
(evidence), BOTH directions — stays on.
- config.anprAutoTrigger (new, absent ⇒ on when anpr is on) = may THIS camera
auto-open the barrier. Set false on the shared-lane exit cam: it still recognises
plates but never auto-triggers. The bridge gates on it (anpr-entry.ts), before the
poll loop.
UI: a "Auto open/close on subscriber plate" checkbox under ANPR in the camera setup
(shown when anpr is on); persisted true/false so a park can explicitly disable it.
i18n sq+en (also corrected the now-stale anprHint "never opens a barrier" wording —
it does, via the bridge). +1 server test (anprAutoTrigger=false → no snapshot, no
read); 172 green. Documented the two toggle levels (site-wide + per-camera) in
lane-presence-and-anpr-entry.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
A loop started by a far/early car would (a) give up before the REAL car settled at
the barrier, and (b) swallow the real car's pushes (the #polling guard dropped them).
So a confident-but-wrong far-car plate could win, or the intended car get debounced
out after the loop ended — wrong car acted on, right car blocked.
Fix: a push that JOINS a running loop now EXTENDS the deadline (lastPush +
ANPR_POLL_WINDOW_MS) instead of being dropped, capped at start + ANPR_POLL_MAX_MS
(30s) so a continuously-busy lane can't slide forever. Each tick still pulls a FRESH
frame, so the loop tracks whoever is at the barrier NOW, not the car that started it.
Per-camera sliding deadline in #pollDeadline (cleared with #polling in finally).
+1 test (push mid-poll keeps the loop alive past the initial deadline); 171 server
tests green. New knob ANPR_POLL_MAX_MS documented in the komodo env reference + the
two concurrency guards written up in lane-presence-and-anpr-entry.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
apps/web/.env.production hardcoded VITE_API_BASE=http://127.0.0.1:3000 — a
desktop-only value that's WRONG for the booth, which serves the SPA same-origin
(Fastify dist/ via Caddy :80) and needs a RELATIVE /api base. An absolute origin
baked at build would point the browser at localhost. origin.ts treats empty as
relative (API_BASE=""), matching the deploy (the 77b2acb fix / container-deployment
"Web access").
The desktop (Tauri) build DOES need an absolute origin, but that app is a deferred
separate task (currently hardcoded localhost); it must set VITE_API_BASE for its own
build when resumed, not here. Comment updated to say so.
The poll-until-confident loop (prev commit) opened a race: during its ~8s window a
subscriber could scan their card/QR at the reader and exit immediately — but the ANPR
loop kept polling and would ALSO emit a confident read a moment later, exiting the
NEXT open occurrence (a phantom double-exit, worst for a fleet sub with several open).
Guard it with the subscriber's open-occurrence count: the bridge identifies the
subscription as soon as a frame reads the bound plate (identity needs no confidence),
baselines openOccurrenceCount, then each tick AND before emit checks if it moved. If a
credential closed/opened an occurrence mid-poll, the subscriber already transacted →
abort, don't emit. New public SubscriptionFlow.openOccurrenceCount(). Bounded loop is
unchanged (ANPR_POLL_WINDOW_MS=8000 cap; never infinite).
+1 test (credential transacts mid-poll → no double-act); 170 server tests green.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The ANPR bridge took ONE snapshot at the camera's vehicle-alarm instant — but the
alarm fires as the car APPROACHES, so that frame's plate is small/blurry/half-in-
frame and ANPR returns a low-confidence misread ('111'@0.20). The manual test reads
the SAME car at ~100% because by then it's STOPPED at the barrier, well-framed. So
subscriber auto-exit silently never fired (read below the 0.85 floor → ignored).
Fix (the car-stops-at-the-barrier insight): the bridge now PULLS A FRESH FRAME every
ANPR_POLL_MS (1000) and re-runs ANPR until one clears VISION_ENTRY_MIN_CONFIDENCE, or
ANPR_POLL_WINDOW_MS (8000) elapses (drove off / non-subscriber → give up cleanly).
- One loop per camera (#polling set) — the camera's ~1Hz alarm re-fires JOIN the
running loop instead of spawning N concurrent loops.
- Fresh camera.captureSnapshot each tick, NOT captureSnapshotShared (its 1.5s TTL
would re-serve the same bad approach frame).
- Camera-level debounce stamp moved to AFTER a successful emit (suppresses re-fires
for ANPR_DEBOUNCE_MS once we've acted), not before the loop.
VERIFIED on hardware (DS-2CD1047G3H-LIU exit lane): 7 garbage approach frames →
AA890XX@0.999 at the barrier → signed vehicle_exit. Still advisory + fail-soft; a
barrier never opens on a low-confidence read. anpr-entry.test.ts +1 (poll
escalation low→low→high); 169 server tests green. Documented in
lane-presence-and-anpr-entry + the lpr-camera camera-fault writeup.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The admin needs the device web password (to reach a controller/camera's own web
UI), and it's already stored + sent to this admin-only view (redactSecrets strips
only the machine secrets relay/push pw, NOT webPassword — by design, per the
SECRET_CONFIG_KEYS comment). But the form rendered every `secret` field as a masked
password input with no way to unmask it, so the value was present yet unreadable.
Add a per-field show/hide eye toggle on `secret` inputs. No new exposure: the field
is already admin-gated and the value already reaches the client; this just makes the
intended-visible credential readable/copyable. Machine secrets are redacted
server-side and never arrive, so there's nothing there to reveal. i18n sq+en.
healthCheck only opens the transport (TCP connect / USB open) — it proves the
printer is REACHABLE, not that paper feeds and the head fires. Add a "Print test
slip" action so the admin can physically confirm a printer is live (the new
host-net USB /dev/usb/lpN path, or a network printer).
- server: POST /api/setup/test-print — printer-only, re-merges stored secrets like
/test (so an edited network printer authenticates), creates the device, and pushes
a short slip via the device-agnostic printReport(). Fail-soft: a print error
(paper out, head fault, transport drop) is reported, never a 500. Mirrors the
test-anpr pattern.
- web: testPrint() client + PrintTestResult; a button in the device modal shown for
category=printer, with ok/fail rendering. i18n keys in sq + en (parity holds).
Server 168 tests pass; web + server typecheck clean.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
When a camera has Alarm Server push enabled, the setup form now shows the
camera's Alarm Settings (Destination IP / URL / Protocol / Port) ready to copy,
so the operator never hunts the deviceId or memorises the endpoint.
CRUCIAL: host/port come from the BACKEND address on the camera's subnet
(backendIpForDevice + the server's listen port — the same probe the push-IP
picker uses), NOT window.location.origin (the SPA's dev/proxy origin, which
would wrongly say localhost:5173). Verified live: matches the on-camera config
field-for-field (10.0.10.203 / …/event / HTTP / 3000). Shows a "save first"
(needs a deviceId) then "test first" (needs the resolved backend IP) hint.
i18n keys added to sq + en (parity enforced).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The dev box runs vision as bare `uv run uvicorn`, and a plain uv run/uv sync
re-resolves the venv to the lockfile DEFAULTS, stripping fast-alpr/onnxruntime.
So after any `pnpm dev` real ANPR silently degraded to "snapshot, no plate"
(diagnosed 2026-06-25: real reads through 06-22, venv frozen lean since 06-19,
no other env with fast_alpr). The BOOTH was never affected — it runs the Docker
image, which bakes `uv sync --frozen --extra alpr` at build (immutable, weights
pre-warmed); a booth ModuleNotFoundError is a STALE image (fix: booth.sh update).
Vision package.json dev/start/recognize now run `uv sync --extra alpr &&` first
so pnpm dev is self-healing; added a dev:stub escape hatch for a lean run.
Documented in wiki/decisions/vision-service-packaging.md ("Two runtimes, one
fragile") + a log entry.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
On a vehicle entry, two paths captured the SAME Hikvision camera within ~1s —
the ANPR bridge (barrier-driving) and the advisory snapshotAsync (evidence/
telemetry) — each from a separate adapter instance. Hikvision serves snapshots
single-threaded, so the second concurrent GET returned HTTP 503; the bridge
then fail-softed and burned its 12s debounce, producing a ~74s "slow" subscriber
entry (observed 2026-06-25, Qazim Mulleti / AB816NN — plate read was instant at
conf 1.000; the delay was the 503/debounce churn, not recognition).
Add captureSnapshotShared() in snapshot.ts: a module-level, deviceId-keyed cache
that both paths call. It coalesces in-flight captures (the 2nd caller awaits the
1st's pull → no concurrent 503), serves a brief freshness window (1500ms) so the
bridge→advisory sequence for one vehicle reuses one frame, never caches a failure
(next caller retries), and keys by deviceId (no cross-camera/stale-vehicle reuse).
Wired into anpr-entry.ts (bridge) and snapshot.ts (advisory).
Tests: snapshot.test.ts (concurrent coalescing, TTL reuse, TTL-lapse re-pull,
failure-not-cached, per-camera keying); anpr-entry.test.ts mock updated. 168
server tests green.
NOTE: this removes the latency (the 503 collision). The separate double-entry
(two signed vehicle_entry for one car) — debounce-too-short / stamp-before-
success — is still open; less likely now but not eliminated.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The wizard rendered every configField in a flat loop, so the USB device path
showed under a Network printer (and host/port would show under USB) — the
form could mislead. Add a transport-aware filter (mirroring the existing
pulseMs/inputRestingHigh skip): when Connection=USB hide host/port/httpPort,
otherwise hide devicePath. Verified live (Playwright): each transport shows
only its own fields and toggling swaps them.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Two bugs in the button-light controller:
1. Stuck relay (random on/off). The blink fired fire-and-forget setAux every 500ms over
UNORDERED UDP with no serialization — concurrent on/off packets reordered/overlapped,
so the relay latched on whichever packet the device processed last. Replace with a
desired-state + serialized worker (#pump): the blink timer only flips desiredOn; a
single in-flight send per lamp is guaranteed, and on completion it re-converges to the
latest desired state — so the final state is always authoritative and a lost/stale
packet self-corrects.
2. Lamp ignored until restart. The lamp map was built once at start(); a button light
added/changed via the UI never took effect without a server restart. #reconcile now
re-reads the device config (at start and before each event, like DeviceMonitor),
adding/updating/dropping lamps live — so a just-saved lamp blinks on the next radar
edge.
Tests assert confirmedOf() (the device's latched state); +1 reconcile-after-start case.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The controller editor mixed outputs and inputs in one flat "Relays" block — relay
direction, the entry-button terminal, and the presence/radar terminal all on the same
row, with the lamp orphaned below. Reorganize into two labelled sections:
- Outputs — relays (barriers + lamp): relay # + direction, the button-light relay, and
"Pulse open (ms)" (a relay hold-time, NOT an input setting — answers a recurring
confusion).
- Inputs — terminals (button, sensor): per entry relay, the button + presence/radar
terminals (kind, active-low) and cooldown, each labelled "For relay N", plus the
board-wide "Inputs idle HIGH".
UI-only: storage stays config.relays[] (+ config.buttonLight), so saved booth configs
keep working with no migration. pulseMs/inputRestingHigh are pulled out of the generic
field loop and rendered in their section. i18n parity (sq + en).
Also passes the device id to testDevice() so an edited device's stored relay password
re-merges on Test connection (pairs with the secure-merge server change).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The relay control password (relay_pw) was read by the driver but had NO form field,
so Test connection sent it as 0 → the device ignored the probe → a controller showed
"offline" even though it pinged. Add a "Relay control password" config field (secret;
blank keeps the stored value).
Because relayPassword is redacted from the client, the edit form can't resend it — so
the test endpoint now re-merges the stored secret by device id (mirroring save). It is
re-merged ONLY when the submitted config addresses the SAME device: matching driverId
and every connection-identity field it sets (host/port/binaryPort/httpPort/serial). A
redirected host/port or mismatched driver yields NO secret, so a probe can't exfiltrate
the password to an attacker host (the booth operator is the threat-model adversary).
testDevice() now passes the device id; setup-secrets.test.ts covers the identity guard.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Model the entry button (I1) and a Hikvision radar (I2) as named children of the
access controller, and drive the button's 12V lamp on a spare relay.
- Radar = the existing relays[].presenceInput one-car-one-ticket gate, now labelled
presenceKind: loop|radar. A radar may idle opposite the button, so add a per-input
active-level override: relays[].presenceActiveLow -> driver inputActiveLow set,
inverting just that terminal (pure helper inputActive()). The Dingtian has one
board-wide resting level otherwise.
- AuxOutputDevice.setAux(channel,on) capability on the device interface (Dingtian
latch) so business logic drives a NON-barrier lamp through the interface. Barriers
still only pulseOpen — barrier-not-a-door preserved.
- ButtonLightController: subscribes to the radar input edge + the camera lane status
and drives a 3-state lamp — radar+car=solid, radar-only=blink (~1Hz), else off.
Fails OFF on host loss/error; de-duped. A radar detection never opens a barrier on
its own (advisory; threat model).
- SetupWizard: presence kind + active-low + a button-light relay picker; sq+en i18n.
Tests: button-light.test.ts (truth table + blink + fail-OFF + de-dupe),
access-dingtian.test.ts (active-level inversion). Workspace build+lint+test green
(158 server tests). Wiki: hikvision-radar, button-light-indicator + updates.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Self-service profile: any signed-in user edits their OWN fullName/email and
changes their OWN password (proving the current one), without any user:*
permission. New routes PUT /api/auth/profile + /api/auth/password act only on
req.user.sub (cannot touch username/role), CSRF-guarded; SPA screen at /profile
reachable from the header username chip. email added to the session view +
SessionUser. 7 tests (routes/profile.test.ts); 148 server tests green.
Desktop in CI: new .gitea/workflows/build-desktop.yml builds .deb + .AppImage
on every push to dev/main and uploads them as unsigned workflow artifacts
(per-commit test build). Signed/versioned release stays on release.yml (tag v*).
Wiki: local-jwt-auth (self-service routes), desktop-shell-tauri (two-workflow CI
split), log entry.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
apps/web/.env.production sets VITE_API_BASE=http://127.0.0.1:3000 for the TAURI
desktop build (which loads from tauri://localhost and needs an absolute backend
origin). But Vite auto-loads .env.production for ANY `vite build`, so the server
image baked 127.0.0.1:3000 into the browser bundle — loading the UI from a real
host (e.g. http://parksystems.msai.al) then made the browser call 127.0.0.1:3000
cross-origin and fail the Same-Origin Policy on /api/auth/login.
Fix: the server Dockerfile writes apps/web/.env.production.local with an empty
VITE_API_BASE before the web build (.local has higher Vite precedence), so the SPA
served by Fastify stays relative/same-origin (/api/...). The desktop build is
unaffected (it doesn't use this Dockerfile). Verified: 127.0.0.1:3000 no longer in
the built bundle; /api/auth/login is relative.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Containerize the two non-desktop apps for the booth appliance. The desktop app stays
on its own tag-only release.yml.
- apps/server/Dockerfile: multi-stage node:22-alpine. `pnpm deploy --legacy --prod`
(NOT prune — the monorepo native better-sqlite3 won't resolve under a root prune)
yields a self-contained bundle; build stage adds node-gyp toolchain, runtime adds
libstdc++; non-root, healthcheck. Migrates the mounted DB on boot via a drizzle-kit-
free runtime migrator (packages/db/scripts/migrate-runtime.mjs) — drizzle-kit is a
devDep, pruned from prod.
- apps/server/src/static-spa.ts: Fastify serves the built React SPA (one container
serves API + UI). GET-only fallback to index.html, excludes /api + /health so it never
shadows the backend; a no-op in dev (no dist). Registered last in server.ts.
- apps/vision/Dockerfile: uv base, --extra alpr, model weights PRE-WARMED into the image
as the runtime user so fast_alpr boots offline (0 downloads at runtime). Engine env-
selected (VISION_RECOGNIZER stub|fast_alpr).
- Branch-aware: docker-compose.yml (base) + .dev.yml (build local, stub, ports) +
.prod.yml (pull pinned, fast_alpr, vision internal, restart always); REGISTRY/TAG from
env so a branch deploy pulls that branch's image.
- .gitea/workflows/build-images.yml: on push to dev/main, run the full turbo build+lint+
test gate, then buildx push both images to git.infra.msai.al/mca/parking_solution with
branch + branch-<sha> tags (registry cache; optional Komodo webhook behind KOMODO_ENABLED).
- .dockerignore excludes **/parking.sqlite* so the signed ledger is NEVER baked.
Verified locally (Docker 29): server image migrates + serves API+SPA (/health 200, /
+ /booth HTML, /api/nope JSON 404, no sqlite outside /data); vision image boots fast_alpr
with 0 runtime downloads; compose stack healthy with server→vision over the private network.
Wiki: new container-deployment.md; vision-service-packaging open Qs resolved; index + log.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Cancel a misprinted/test/wrong-vehicle ticket via a SIGNED `void` event — the
vehicle_entry is never edited/deleted (append-only). VoidFlow appends void{
voidedEntryRef, voidReason, operator, reasonCode:"void.ticketCancelled" }; route
POST /api/tickets/void gated event:void + open shift; reason REQUIRED. Refuses a
subscription / already-exited / already-voided / paid ticket (refund out of scope).
The void folds the session CLOSED everywhere it's counted — occupancy (count +
reserved spots), pay-station (lookup/activeSessions), exit-flow (#sessionFor), and
reports (excluded from entries) — so a voided car stops occupying a spot, can't be
paid/exited, and doesn't inflate "cars entered". No barrier action. Booth UI: a
"Cancel ticket" action in the pay/exit lookup modal (transient + unpaid + open;
gated on event:void) with a preset-or-free reason prompt.
Reclassify the Live feed: refused-action events (exitRefused/entryRefused/
permitRefused — e.g. a double card-scan, at-capacity subscriber, exit on a closed
session) are benign warnings, not red anomalies. event-detail.tsx now shows them as
amber REFUZUAR/REFUSED, reserving red ANOMALI for genuine red-flags. Display-only —
no ledger change, so historical events reclassify too.
CI: install uv + sync vision deps before the Turbo run. @parking/vision's lint/
typecheck/test shell to `uv run …`, but CI set up only Node+pnpm, so `uv run ruff`
failed ("uv not found") and broke the whole Turbo run. The Python checks pass once
uv provisions the toolchain.
- new: void-flow.ts (+ tests, 8) ; occupancy void-fold test
- shared: reason code void.ticketCancelled ; both web catalogs (sq/en parity)
- wiki: parking-session (ticket-void folds + guards, refused/anomaly split), log
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Wire the lane camera's vehicle event into the gated subscription flow: on a
vehicle/active push from an opt-in (config.anpr) camera, AnprBridge pulls a fresh
snapshot, runs ANPR, applies a stricter entry confidence floor, debounces, and —
matching the plate to a subscription BEFORE emitting — emits a kind:"plate" read.
The existing ReadDispatcher -> SubscriptionFlow then signs the entry/exit and opens
the barrier. A plate is never the sole authority: it routes through the same gate
(active/window/blocklist/car-count) as any credential. Fail-soft, fire-and-forget,
subscriber-only by construction. Field-verified end to end (plate AA504LX opened the
entry barrier and appended a signed vehicle_entry).
Add an admin master switch (site_config.anpr_entry_enabled, default ON) in Site
Settings that disables ONLY the barrier-driving bridge; advisory snapshot-ANPR and
lane busy/free are unaffected. Read live per event, so toggling takes effect with no
restart. Migration 0013 (additive ALTER ADD COLUMN, default 1).
- New: apps/server/src/anpr-entry.ts (AnprBridge) + tests (9)
- hikvision-alarm.ts hands vehicle detections to the bridge (fire-and-forget) + wiring tests (3)
- server.ts reorders the read flows above the hik-alarm registration
- snapshot.ts exports buildCamera for reuse
- env: VISION_ENTRY_MIN_CONFIDENCE (0.85), ANPR_DEBOUNCE_MS (12000)
- site route + SiteSettings checkbox + i18n (sq/en parity)
- wiki: lane-presence-and-anpr-entry / lpr-camera / index / log -> BUILT
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Controlled in/out test on the camera: the `active` re-fire rate is
MOVEMENT-driven, not steady — ~1-3s apart while the car moves, but up to
~15-25s when it sits MOTIONLESS in the zone. A 5s TTL would flicker a
parked car free; the TTL must exceed the still-car gap. The camera has
~no dwell lag (goes silent within ~1s of the car leaving — measured: last
event 16:15:17 vs car-left ~16:15:30), so 30s keeps a motionless car busy
while clearing promptly after departure. This also confirms vision-based
tracking isn't warranted: the camera's leave signal is already tight.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Measured the real re-fire rate on the camera: while a vehicle is in the
zone it POSTs `active` about every ~1 second (not the ~30-80s I'd guessed).
The camera sends no leave signal, so "free" is timeout-driven — but with a
~1s re-fire, 90s made the lane stay red for a minute and a half after the
car left. 5s of silence reliably means the car is gone; the light now
clears within seconds. Still override-able via LANE_BUSY_TTL_MS.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
A Hikvision vehicle detection (eventType=VMD, targetType=vehicle) on a
camera bound to entry/exit now marks that lane "busy" and shows it as a
barrier light beside the scan input on the booth (green=free, red=busy).
Advisory only — it gates nothing (never blocks a ticket or opens a barrier).
- Parse eventState (active/inactive) from the Hik payload.
- LaneStatus tracker: a vehicle `active` event marks the camera's bound lane
busy + arms an auto-clear timer. This camera class sends no leave/`inactive`
signal, so "free" is timeout-driven (LANE_BUSY_TTL_MS, default 90s; the
camera re-fires `active` while a car sits there, refreshing the timer). A
"both"-direction camera marks both lanes.
- Push lane-status over the existing booth WS (+ in the hello snapshot);
live-store holds { entry, exit }; two BarrierLight icons render it.
- i18n booth.laneEntry/laneExit (sq + en).
Tests: lane-status.test.ts (7 — busy/free, TTL auto-clear, timer re-arm,
no re-emit while busy, both/exit direction, unknown device). server 120/120;
web + server build/lint green.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Vite had no host set (localhost only). Bind 0.0.0.0 so the dev booth UI is
reachable from other LAN devices at http://<host-lan-ip>:5173. The SPA
already uses relative paths + the page origin for API and the live WS, so
no app code changes — but loading from a non-localhost origin means the
/api/ws handshake's Origin is the LAN address, which the backend's
WS_ALLOWED_ORIGINS must include (documented in .env.example; the host's own
.env is gitignored).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Diagnosed why no camera push ever landed: (1) the route only registered
POST/GET, so a probe with another method got a generic 404 the camera
reads as "service available" while our handler never ran; (2) more
fundamentally, WSL mirrored mode REWRITES the inbound source IP to the
host's own address (10.0.10.203), so the camera's real IP (10.0.10.12)
never survives and the source-IP guard rejected every push as a mismatch.
- Register the event route on POST/GET/PUT/PATCH/DELETE/OPTIONS (HEAD comes
with GET) so ANYTHING hitting the path reaches the handler and is recorded.
- Log + store the HTTP method of each hit; log every hit on arrival, before
any guard, so even a rejected probe is visible immediately.
- Add per-device skipSourceIpCheck (a Setup checkbox) to bypass the
source-IP guard where the network rewrites the source (WSL). Digest auth +
the signed ledger remain the real guards.
Tests: hik-alarm 10 (skip-IP accept + method capture). server green;
web build green (new checkbox renderer + this field).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The generic config-field loop had no boolean branch, so a type:"boolean"
field (e.g. the camera's alarmPushEnabled) fell through to a TEXT input and
saved the STRING "true" instead of a real boolean. Downstream checks use
=== true, so the feature read as disabled even when the admin ticked it.
- Web: render type:"boolean" config fields as a real checkbox; store/merge
a true/false boolean (and persist false on edit so toggling off sticks);
normalize a legacy string "true"/"false" on load.
- Server: isOn() coerces the flag when reading config (accepts true/"true"/
1/"yes"/"on") so an existing row saved as the string "true" still works
without a re-save, and no other boolean field hits the same trap.
Tests: hik-alarm accepts string "true" for alarmPushEnabled. server
112/112; web typecheck + build green.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Debugging "is the camera event coming or not?" was painful: a rejected
push only logged a warning and recorded nothing, so "no event" was
ambiguous (never sent vs sent-and-refused), and the only durable record
was an unreadable device_events row.
- Record EVERY push, accepted or rejected: accepted -> kind:"alarm",
rejected -> kind:"alarm-rejected" with the precise reason (unknown
device / not-hikvision / push-disabled / source-IP mismatch / digest
fail). The 404 body now also returns the reason.
- New GET /api/devices/hikvision/alarms (device:read): the recent pushes
newest-first as JSON (accepted+rejected, with ip/reason/eventType/
target/plate/rawHead) so you can SEE arrivals in the browser instead of
grepping the dev log or querying SQLite.
Tests: hikvision-alarm.test.ts now 8 (rejection-recorded + read-endpoint
list + gating). server 111/111; build+lint green.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Newer Hik firmware can PUSH events to us: Event -> Smart/VCA with
"Detection Target: Human/Vehicle" + Notify Surveillance Center + Alarm
Settings -> Alarm Server makes the camera HTTP-POST an
EventNotificationAlert on each detection.
- New POST /api/devices/hikvision/:deviceId/event (routes/hikvision-alarm.ts):
same machine-push pattern as the Dingtian Input Link — source-IP guarded
+ optional HTTP Digest, not behind the SPA cookie/CSRF.
- Discovery-first / permissive: a wildcard content-type parser accepts ANY
body as raw bytes (event XML, multipart+JPEG, or JSON — Hik varies by
firmware), records it verbatim as a kind:"alarm" device_event, and
best-effort extracts eventType/target/plate/dateTime/channelID for the
summary + a loud log line. The point is to SEE exactly what a camera
sends before wiring it further.
- hikvision driver gains alarmPushEnabled + pushUser/pushPassword config and
pushesToBackend:true (setup offers the backend push IP).
- NOT yet a barrier trigger / DeviceReadEvent — records only. A plate read
is advisory, never the sole reason a barrier opens; the read-bus/ANPR
wiring is a deliberate next step once the real payload is known.
Tests: hikvision-alarm.test.ts (6: vehicle XML summary, ANPR plate, raw
JSON, wrong-IP 404, disabled 404, unknown-device 404). server 109/109;
build+lint 14/14. Wiki: lpr-camera.md + log.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Accidental admin deletes of users/roles/subscriptions/plans/tariffs were
hard and unrecoverable. Now they soft-delete into a recycle bin.
Schema (migration 0012): nullable deleted_at + deleted_by on users, roles,
subscriptions, subscription_plans, tariffs. Additive ADD COLUMN; verified
against a copy of the live DB.
Backend: each resource's DELETE route STAMPS instead of removing; every
catalog list filters deleted_at IS NULL. New recycle-bin module + routes
(GET /api/recycle-bin, POST .../restore, DELETE .../:id purge) gated on a
new recyclebin:read/update/delete permission. A 6-hourly + startup sweep
auto-purges items older than RECYCLE_BIN_RETENTION_DAYS (default 30; 0 =
forever).
Invariants: soft-deleted users can't log in (login rejects deleted_at;
no-lockout counts live admins only); a soft-deleted subscription doesn't
open the barrier; plans are versioned so a delete stamps all versions of
the plan_id (bin shows one item); username/role-name UNIQUE spans deleted
rows so reuse returns a clear 409 pointing at the bin; restore doesn't
auto-cascade a dangling role (guard resolves missing role to empty perms).
The signed append-only ledger is OUT of scope (no delete path).
Web: a Recycle bin tab under Setup (RecycleBin.tsx) with Restore/Purge +
purge confirm; api client + i18n (sq + en parity).
Tests: recycle-bin.test.ts (9 unit) + recycle-bin-routes.test.ts (4
integration: delete -> can't-login -> restore -> login, purge, gating,
409 reuse). server 103/103; build+lint+test 19/19.
Wiki: new concepts/soft-delete.md; local-jwt-auth + index + log updated.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Moves Reports out of the Setup tab bar into a standalone top-level route
(/reports) with its own header nav link, alongside Booth/Shifts/
Subscriptions. Adds a /setup/reports → /reports legacy redirect. Same
report:read gate. Wiki note updated.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Adds an admin Reports screen (/setup/reports, gated report:read) — an
on-demand dashboard over the signed event log.
Server (ledger-first): GET /api/reports/summary?from&to&bucket aggregates
in one call — entry/exit counts + all money summed straight from
ledger_events (same source the shift Z-report reconciles, so totals tie
out to the drawer); revenue split into ticket / subscription-sale /
out-of-window mirrors the Z-report. Duration stats come from the sessions
cache (flagged). All bucketing is in the SITE timezone (siteTz). A .csv
export of the per-bucket series. reports.ts + routes/reports.ts.
Web: Reports.tsx — date-range presets (today/7d/30d/90d), hour/day/month
grain, KPI cards, entry/exit line, revenue bar + cash/card split,
revenue-mix pie, peak-hours histogram, numeric breakdown, subscription
stats. Charts via Recharts (MIT), lazy-loaded into its own chunk
(~111KB gz) so the booth bundle is untouched. New Setup tab + nav + i18n
(sq + en parity). asc() exported from @parking/db; formatMinutes helper.
Tests: reports.test.ts (10) pin the sums, tz bucketing, money split,
duration stats, subscription counts. server 90/90; build+lint 14/14.
Wiki: reporting-analytics.md "Built v1" section + log entry.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Adds a bottom-of-modal "Test ANPR" button (shown only when a camera's
Plate recognition opt-in is checked) that captures a live snapshot off
the camera and runs it through the vision service, reporting the plate
read + confidence + elapsed time, or which stage failed.
- New POST /api/setup/test-anpr: builds the camera from the unsaved
config (no DB write/device change, like /test), captures a snapshot,
runs vision.analyze. Fail-soft like the runtime path (snapshot.ts):
camera/vision failures are reported results, never a 500.
- Thread the existing VisionClient into setupRoutes; add an isCamera()
type guard to @parking/devices.
- Web: testAnpr() client + AnprTestResult; button, hint, result line.
- i18n keys in sq + en (Catalog parity).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
secureCookies() keyed off NODE_ENV === "production", so an appliance deployed
without that var silently sent the auth + CSRF cookies WITHOUT the Secure flag —
the review's one Medium finding.
Now Secure is the DEFAULT and you only ever opt OUT: a misconfigured/forgotten env
can only make cookies more restrictive, never drop the flag. Dropped only on a
deliberate COOKIE_SECURE=0/false/no/off (or an explicit NODE_ENV=development as a
dev fallback). The LAN appliance that serves the SPA over plain http sets
COOKIE_SECURE=0 on purpose (a Secure cookie would never be sent over its http origin
and would lock operators out); a TLS deploy leaves it unset and gets Secure.
- auth.test.ts (5): pins the matrix — default Secure, production Secure, dev opt-out,
COOKIE_SECURE falsey opts out, any other value opts in.
- .env.example documents COOKIE_SECURE (replaces the stale NODE_ENV cookie note).
- dev .env sets COOKIE_SECURE=0 (local http://localhost login keeps working).
server 80/80; build+lint green.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The two failing apps/vision smoke tests assumed stub mode but the local .env sets
VISION_RECOGNIZER=fast_alpr (real-model work, 2026-06-19), so the app built the real
recognizer: /health reported "fast_alpr" not "stub", and /analyze on garbage bytes
422'd (real decode reject) instead of returning the empty stub contract.
Fix is test isolation: a conftest autouse fixture pins VISION_RECOGNIZER=stub for the
session (an OS env var overrides the .env in pydantic-settings), restoring it after.
vision 7/7.
Updates wiki/concepts/booth-console.md (the "no automated tests" Open note now reflects
the coverage that landed) and appends wiki/log.md.
Full workspace: shared 87, server 75, devices 18, web 17, vision 7 = 204 tests across
8 turbo test tasks, 0 failures; build/lint 14/14.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Closes the standing "no automated frontend tests" gap for the pure, testable logic:
- format.test.ts (12): the booth display formatters — formatMoney (minor units →
currency, malformed-code fallback), formatDuration (m / h+m / 0m / em-dash on
negative-invalid), formatTime, and formatRelativeDateTime (today/yesterday words +
catalog month names, no Intl dependence).
- use-scanner.test.ts (5): the 2026-06-21 focus-independent hardware scan — a fast
burst+Enter on <body> fires onScan; slow human typing (gap > 50ms) does not; paused
(modal open) no-ops; keystrokes into an editable field are ignored; a lone Enter /
too-short burst is ignored.
Wires Vitest (jsdom + @testing-library/react) into @parking/web. web 17/17.
Full workspace green: shared 87, devices 18, server 75, web 17 (= 197) + build/lint
14/14. (apps/vision still has its 2 pre-existing failures — next.)
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Boots the REAL Fastify app over a fresh in-memory DB (buildServer({ db }), driven by
app.inject — no listen) to exercise the security seam end to end:
- routes.test.ts (7): /health open; login rejects bad creds and sets token+csrf
cookies on good ones; an unauthenticated GET /api/occupancy is 401; a site:read-only
role GETs occupancy but is 403 on PUT /api/site-config (the permission gate, with a
valid CSRF so the 403 is the perm check); an admin passes the same PUT; and a mutation
with the auth cookie but NO csrf header is 403 (double-submit enforced).
Adds seedUser()/login() helpers (real bcrypt + the real /api/auth/login route) and
LOG_LEVEL=silent in the vitest env so asserted 401/403 responses don't flood output.
server 75/75 green (8 suites).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Completes the anti-fraud/safety core coverage on a fresh in-memory DB:
- occupancy.test.ts (12): the ledger-fold count, the capacity/full gate, and the
reserved-subscriber-spots model — never double-count a parked subscriber, reserve
tightens only the TRANSIENT gate.
- pay-station.test.ts (12): quote math against the frozen tariff, the signed-payment
side effect (+ chain verify), no-session / no-tariff errors, the booth lookup view,
active-session listing.
- exit-flow.test.ts (9): the GATE — refuse unknown / unpaid / grace-expired (no exit
signed); a paid-within-grace session signs the exit; the booth transient path has NO
subscription bypass; a prepaid subscriber leaves via the assist (reopenBarrier) path.
- shift-service.test.ts (14): site-wide single-open invariant, the takings SPLIT by
source (subscription sales vs out-of-window vs transient tickets), drawer carry-
forward + cash_in/out vouchers, Z-report sign + listShifts read-back.
- entry-flow.test.ts (5): the exported validateTicketCode Luhn typo-guard. (The
capacity-gate/print-hold/sign-before-open paths need device fakes — covered in the
device + route phases.)
Adds test-helpers.ts (real EventLog, silent logger, tariff seeder). server 68/68 green.
Note: apps/vision has 2 PRE-EXISTING failures (test_app.py) — environment drift now
that fast_alpr + the ONNX model are installed (the "stub mode" assertions are stale).
Untouched here; to be fixed in the vision phase.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
julian